[PATCH v5 5/5] dmaengine: sun6i-dma: Implement support for Allwinner A733 DMA controller

[Yuanshen Cao]

Implement support for the Allwinner A733 DMA controller by defining
A733-specific register offsets, bitfield masks, and the
`sun60i_a733_dma_cfg` configuration structure.

This includes the IRQ stride, offsets, and channel counts specific to the
A733, as well as the 32G mask for high-address fields in the LLI. Add
`sun60i_a733_dma_cfg`, which ties all the refactored functionality
together for A733.

Signed-off-by: Yuanshen Cao <alex.caoys@xxxxxxxxx>
---
 drivers/dma/sun6i-dma.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index ffb63212bea7..66281e01972d 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -54,10 +54,14 @@
  * Interrupts specific registers
  */
 #define DMA_IRQ_STRIDE_A31		0x04
+#define DMA_IRQ_STRIDE_A733		0x40
 #define DMA_IRQ_EN_OFFSET_A31		0x00
+#define DMA_IRQ_EN_OFFSET_A733		0x134
 #define DMA_IRQ_STAT_OFFSET_A31		0x10
+#define DMA_IRQ_STAT_OFFSET_A733		0x138
 
 #define DMA_IRQ_CHAN_NR_A31		8
+#define DMA_IRQ_CHAN_NR_A733		1
 
 /*
  * Channels specific registers
@@ -107,6 +111,8 @@
  */
 #define SRC_HIGH_ADDR_MASK	GENMASK(17, 16)
 #define DST_HIGH_ADDR_MASK	GENMASK(19, 18)
+#define SRC_HIGH_ADDR_32G_MASK	GENMASK(13, 11)
+#define DST_HIGH_ADDR_32G_MASK	GENMASK(17, 15)
 
 /*
  * Various hardware related defines
@@ -1318,6 +1324,32 @@ static struct sun6i_dma_config sun50i_h6_dma_cfg = {
 	SUN6I_DMA_IRQ_A31_COMMON_CFG
 };
 
+/*
+ * The A733 binding uses the number of dma channels from the
+ * device tree node.
+ */
+static struct sun6i_dma_config sun60i_a733_dma_cfg = {
+	.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
+	.set_burst_length = sun6i_set_burst_length_h3,
+	.set_drq          = sun6i_set_drq_h6,
+	.set_mode         = sun6i_set_mode_h6,
+	.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
+	.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
+	.src_addr_widths   = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+			     BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+			     BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
+	.dst_addr_widths   = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+			     BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+			     BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
+	.src_high_addr_mask = SRC_HIGH_ADDR_32G_MASK,
+	.dst_high_addr_mask = DST_HIGH_ADDR_32G_MASK,
+	.has_mbus_clk = true,
+	.irq_stride      = DMA_IRQ_STRIDE_A733,
+	.irq_en_offset   = DMA_IRQ_EN_OFFSET_A733,
+	.irq_stat_offset = DMA_IRQ_STAT_OFFSET_A733,
+	.num_channels_per_reg = DMA_IRQ_CHAN_NR_A733,
+};
+
 /*
  * The V3s have only 8 physical channels, a maximum DRQ port id of 23,
  * and a total of 24 usable source and destination endpoints.
@@ -1352,6 +1384,7 @@ static const struct of_device_id sun6i_dma_match[] = {
 	{ .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg },
 	{ .compatible = "allwinner,sun50i-a100-dma", .data = &sun50i_a100_dma_cfg },
 	{ .compatible = "allwinner,sun50i-h6-dma", .data = &sun50i_h6_dma_cfg },
+	{ .compatible = "allwinner,sun60i-a733-dma", .data = &sun60i_a733_dma_cfg },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun6i_dma_match);

-- 
2.55.0