Re: [PATCH v3 1/9] ASoC: dt-bindings: qcom,qaif-cpu: Add binding

[Harendra Gautam]

On Wed, Aug 26, 2026 at 3:13 PM Srinivas Kandagatla
<srinivas.kandagatla@xxxxxxxxxxxxxxxx> wrote:
>
>
>
> On 8/26/26 10:39 AM, Harendra Gautam wrote:
> >>> + * CIF (Codec Interface) VA TX DAI IDs -- capture from voice activity codec.
> >>> + * WRDMA channels collect audio from the VA codec and write it to memory.
> >>> + */
> >>> +#define QAIF_CDC_DMA_VA_TX0  246
> >>> +#define QAIF_CDC_DMA_VA_TX1  247
> >>> +#define QAIF_CDC_DMA_VA_TX2  248
> >>> +#define QAIF_CDC_DMA_VA_TX3  249
> >>> +#define QAIF_CDC_DMA_VA_TX4  250
> >>> +#define QAIF_CDC_DMA_VA_TX5  251
> >>> +#define QAIF_CDC_DMA_VA_TX6  252
> >>> +#define QAIF_CDC_DMA_VA_TX7  253
> >>> +#define QAIF_CDC_DMA_VA_TX8  254
> >>> +#define QAIF_CDC_DMA_VA_TX9  255
> >>> +
> >> These DAI IDs exceed the LPASS_MAX_PORT limit, which will cause sound
> >> card registration to fail.
> >>
> >> Check sound/soc/qcom/common.c, as the current indices (246-255) are
> >> beyond the supported LPASS port range.
> >>
> >> Best Regards,
> >> Rafi.
> > Thanks for pointing this out. We can either add the range check for
> > min/max QAIF DAI IDs in qcom/common.c or introduce a common helper in
> > qcom/common.h to validate the supported DAI IDs across Qualcomm
> > platforms.
>
> You should add these ids to
> include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h instead to avoid
> conflicts with common code.
>
> --srini
Thanks for the suggestion. qcom,q6dsp-lpass-ports.h is specific to Q6
DSP/AFE virtual port IDs. Since QAIF is a direct MMIO driver with no
Q6 DSP involvement, would adding QAIF IDs there not be misleading?
would it be better to update the range check in common.c/common.h to
accommodate both LPASS and QAIF DAI ID ranges instead?
-Harendra
> > -Harendra
>