[PATCH v2 net-next 1/2] net: phy: mediatek: differentiate MT7530 GE PHY from EcoNet FE PHY

[Caleb James DeLisle]

MT7530 gigabit PHY has the same ID as an EcoNet EN751221 10/100
PHY. Differentiate by checking whether the PHY supports 1000BASE-T
which is always supported by MT7530.

Signed-off-by: Caleb James DeLisle <cjd@xxxxxxxx>
---
 drivers/net/phy/mediatek/mtk-ge.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/phy/mediatek/mtk-ge.c b/drivers/net/phy/mediatek/mtk-ge.c
index 73d9b72f9d9e..3b4d774057c2 100644
--- a/drivers/net/phy/mediatek/mtk-ge.c
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -96,6 +96,19 @@ static int mt7531_phy_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+/*
+ * MTK_GPHY_ID_MT7530 collides with ECONET_FEPHY_ID_LEGACY
+ * but this is a gigabit PHY so ESTATUS lists 1000BASE-T.
+ */
+static int mt7530_phy_match(struct phy_device *phydev,
+			    const struct phy_driver *phydrv)
+{
+	if (phydev->phy_id != MTK_GPHY_ID_MT7530)
+		return false;
+
+	return (phy_read(phydev, MII_ESTATUS) & ESTATUS_1000_TFULL) != 0;
+}
+
 static struct phy_driver mtk_gephy_driver[] = {
 	{
 		PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7530),
@@ -106,6 +119,7 @@ static struct phy_driver mtk_gephy_driver[] = {
 		 */
 		.config_intr	= genphy_no_config_intr,
 		.handle_interrupt = genphy_handle_interrupt_no_ack,
+		.match_phy_device = mt7530_phy_match,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
 		.read_page	= mtk_phy_read_page,
-- 
2.39.5