[PATCH v2 9/9] i2c: qcom-geni: Use geni_se_set_rate() for setting source clock frequency

[Praveen Talari]

GENI resource management may be handled either through the Linux clock
framework or a firmware-managed performance domain. Source clock
programming currently depends on platform-specific callbacks.

Use geni_se_set_rate() for source clock programming and perform the
source clock configuration from qcom_geni_i2c_conf(), allowing the GENI
core to abstract the underlying resource-management mechanism from the
I2C driver. This removes the need for platform-specific rate-setting
callbacks and enables a common code path across all GENI I2C platforms.

Signed-off-by: Praveen Talari <praveen.talari@xxxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 0b178701e1d1..deb0d822290c 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
-#include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <linux/soc/qcom/geni-se.h>
 #include <linux/spinlock.h>
@@ -219,14 +218,14 @@ static int geni_i2c_clk_map_idx(struct geni_i2c_dev *gi2c)
 	return -EINVAL;
 }
 
-static int qcom_geni_i2c_conf(struct geni_se *se, unsigned long freq)
+static int qcom_geni_i2c_conf(struct geni_se *se)
 {
 	struct geni_i2c_dev *gi2c = dev_get_drvdata(se->dev);
 	const struct geni_i2c_clk_fld *itr = gi2c->clk_fld;
 	u32 val;
 	int ret;
 
-	ret = dev_pm_opp_set_rate(se->dev, itr->src_clk_freq);
+	ret = geni_se_set_rate(&gi2c->se, itr->src_clk_freq);
 	if (ret)
 		return ret;
 
@@ -985,7 +984,7 @@ static int geni_i2c_xfer(struct i2c_adapter *adap,
 		return ret;
 	}
 
-	ret = gi2c->dev_data->set_rate(&gi2c->se, gi2c->clk_freq_out);
+	ret = qcom_geni_i2c_conf(&gi2c->se);
 	if (ret)
 		return ret;
 
@@ -1228,7 +1227,7 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
 		}
 	}
 
-	dev_pm_opp_set_rate(dev, 0);
+	geni_se_set_rate(&gi2c->se, 0);
 
 	return 0;
 }
@@ -1239,7 +1238,7 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
 	struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
 
 	if (gi2c->clk_fld && gi2c->clk_fld->src_clk_freq) {
-		ret = dev_pm_opp_set_rate(dev, gi2c->clk_fld->src_clk_freq);
+		ret = geni_se_set_rate(&gi2c->se, gi2c->clk_fld->src_clk_freq);
 		if (ret)
 			return ret;
 	}
@@ -1290,7 +1289,6 @@ static const struct dev_pm_ops geni_i2c_pm_ops = {
 
 static const struct geni_i2c_desc geni_i2c = {
 	.resources_init = geni_se_resources_init,
-	.set_rate = qcom_geni_i2c_conf,
 	.power_on = geni_se_resources_activate,
 	.power_off = geni_se_resources_deactivate,
 };
@@ -1299,14 +1297,12 @@ static const struct geni_i2c_desc i2c_master_hub = {
 	.no_dma_support = true,
 	.tx_fifo_depth = 16,
 	.resources_init = geni_se_resources_init,
-	.set_rate = qcom_geni_i2c_conf,
 	.power_on = geni_se_resources_activate,
 	.power_off = geni_se_resources_deactivate,
 };
 
 static const struct geni_i2c_desc sa8255p_geni_i2c = {
 	.resources_init = geni_se_domain_attach,
-	.set_rate = geni_se_set_perf_opp,
 };
 
 #ifdef CONFIG_ACPI

-- 
2.34.1