Re: [PATCH net v2] net: phy: air_en8811h: restore AN8811HB LED GPIO after MCU restart

[Ziyou Xu]

Right, I'll fold that into v3.

Andrew Lunn <andrew@xxxxxxx> 于2026年8月28日周五 21:09写道：
>
> > @@ -1265,10 +1258,19 @@ static int an8811hb_config_init(struct phy_device *phydev)
> >
> >       ret = air_leds_init(phydev, EN8811H_LED_COUNT, AIR_PHY_LED_DUR,
> >                           AIR_LED_MODE_USER_DEFINE);
> > -     if (ret < 0)
> > +     if (ret < 0) {
> >               phydev_err(phydev, "Failed to initialize leds: %d\n", ret);
> > +             return ret;
> > +     }
> >
> > -     return ret;
> > +     /* Restore LED GPIO output enables after MCU initialization. */
> > +     ret = air_phy_buckpbus_reg_modify(phydev, AN8811HB_GPIO_OUTPUT,
> > +                                       AN8811HB_GPIO_OUTPUT_345,
> > +                                       AN8811HB_GPIO_OUTPUT_345);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     return 0;
>
> That can be squashed down to:
>
>         return ret;
>
>     Andrew
>
> ---
> pw-bot: cr