Re: [PATCH v2] MIPS: config: Add EcoNet EN751221 defconfig

[Randy Dunlap]

On 8/28/26 3:40 AM, Caleb James DeLisle wrote:
> 
> On 28/08/2026 01:48, Randy Dunlap wrote:
>>
>> On 8/17/26 3:03 PM, Caleb James DeLisle wrote:
>>> Add config based on OpenWrt for EN751221 boards.
>>> Of note: EcoNet bootloader has a 7.2MB kernel size limit so
>>> ZBOOT is assumed to be needed in all cases.
>>>
>>> Signed-off-by: Caleb James DeLisle <cjd@xxxxxxxx>
>>> ---
>>> Updated to work after SERIAL_8250 and SERIAL_OF_PLATFORM removed
>>> from Kconfig.
>>> Link: https://lore.kernel.org/linux-mips/20260815235109.666268-1-julianbraha@xxxxxxxxx/
>>> ---
>>>   MAINTAINERS                                 |   1 +
>>>   arch/mips/configs/econet_en751221_defconfig | 264 ++++++++++++++++++++
>>>   2 files changed, 265 insertions(+)
>>>   create mode 100644 arch/mips/configs/econet_en751221_defconfig
>>>
>> ...
>>> base-commit: 3b7711be02612845e44b5e9ef7c0b9f203cf29b6
>>> prerequisite-patch-id: 0f044e47a76450ebb4fe52dc60a6b2f79625bbff
>>> prerequisite-patch-id: 6380783b9da35b966b64c237b0ef50c31c7425d6
>> Hi,
>> Can you identify these 2 prerequisite patches?
>> They are not in linux-next so I can't test this patch.
> 
> 
> Ahh, I'm sorry for not being clearer about this in the message.
> 
> The first (0f044e47a76450ebb4fe52dc60a6b2f79625bbff) is 2077ccb9baa2cbbbccf5f0d8c2196dd9d5e43399, i.e. https://patch.msgid.link/20260702150704.265282-1-cjd@xxxxxxxx which is in (at least) next-20260827 but not in mips-next. I included it so I could verify PCIe works on the device.
> 
> 6380783b9da35b966b64c237b0ef50c31c7425d6 is the patch I mentioned: https://lore.kernel.org/linux-mips/20260815235109.666268-1-julianbraha@xxxxxxxxx/ which I applied to verify it works without needing the symbols that the goal was to remove.
> 
> That said, this should definitely build without either of these patches which is why I neglected to explain them in any more detail.

Ah, right you are. Thanks.

Tested-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>

-- 
~Randy