Re: [PATCH net v5 0/6] net: phy: fix cleanup after probe failure

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Sun, 23 Aug 2026 11:55:54 +0800 you wrote:
> From: Xuanqiang Luo <luoxuanqiang@xxxxxxxxxx>
> 
> phy_probe() initializes the PHY driver, ports, SFP upstream, and LEDs in
> stages. Its error paths do not always release only the resources acquired
> at each stage. It can also mark the PHY ready before all setup succeeds.
> 
> Port setup also leaves SFP cleanup split between phy_sfp_probe(),
> phy_setup_ports(), and phy_probe(), and default port setup ignores errors
> from attaching the port to the PHY driver.
> 
> [...]

Here is the summary with links:
  - [net,v5,1/6] net: phy: split phy_probe() error paths
    https://git.kernel.org/netdev/net-next/c/b6d201d97145
  - [net,v5,2/6] net: phy: unregister SFP upstream before port cleanup
    https://git.kernel.org/netdev/net-next/c/f558204abcb9
  - [net,v5,3/6] net: phy: set PHY_READY after LED setup
    https://git.kernel.org/netdev/net-next/c/52dd7eb1a33e
  - [net,v5,4/6] net: phy: call driver remove when core initialization fails
    https://git.kernel.org/netdev/net-next/c/afd5aecd3c07
  - [net,v5,5/6] net: phy: propagate errors from default port setup
    https://git.kernel.org/netdev/net-next/c/48378efebbe7
  - [net,v5,6/6] net: phy: avoid double-free after LED trigger registration failure
    https://git.kernel.org/netdev/net-next/c/f7f619ecda57

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html