[PATCH] clk: qcom: Sort Nord clock driver entries in Kconfig

[Shawn Guo]

The Nord clock driver entries in Kconfig were out of alphabetical order.
Reorder these symbols so Kconfig follows the same order as Makefile,
making it easier to locate and add entries consistently.

Signed-off-by: Shawn Guo <shengchao.guo@xxxxxxxxxxxxxxxx>
---
The patch is based on v7.3-rc1

 drivers/clk/qcom/Kconfig | 58 ++++++++++++++++++++--------------------
 1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index d1fc9bf87126..54f20a6f2bc4 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -181,6 +181,16 @@ config CLK_KAANAPALI_VIDEOCC
 	  Say Y if you want to support video devices and functionality such as
 	  video encode/decode.
 
+config CLK_MAILI_VIDEOCC
+	tristate "Maili Video Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	select CLK_HAWI_GCC
+	default m if ARCH_QCOM
+	help
+	  Support for the video clock controller on Maili devices.
+	  Say Y if you want to support video devices and functionality such as
+	  video encode/decode.
+
 config CLK_NORD_DISPCC
 	tristate "Nord Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
@@ -192,16 +202,6 @@ config CLK_NORD_DISPCC
 	  Say Y if you want to support display devices and functionality such as
 	  splash screen.
 
-config CLK_MAILI_VIDEOCC
-	tristate "Maili Video Clock Controller"
-	depends on ARM64 || COMPILE_TEST
-	select CLK_HAWI_GCC
-	default m if ARCH_QCOM
-	help
-	  Support for the video clock controller on Maili devices.
-	  Say Y if you want to support video devices and functionality such as
-	  video encode/decode.
-
 config CLK_NORD_GCC
 	tristate "Nord Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
@@ -213,6 +213,25 @@ config CLK_NORD_GCC
 	  SPI, I2C, USB, SD/UFS, PCIe etc. The clock controller is a combination
 	  of GCC, SE_GCC, NE_GCC and NW_GCC.
 
+config CLK_NORD_GPUCC
+	tristate "Nord Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	select CLK_NORD_GCC
+	default m if ARCH_QCOM
+	help
+	  Support for the graphics clock controllers on Nord devices. There are two
+	  graphics clock controllers on Nord SoC.
+	  Say Y if you want to support graphics controller devices and
+	  functionality such as 3D graphics.
+
+config CLK_NORD_TCSRCC
+	tristate "Nord TCSR Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	default m if ARCH_QCOM
+	help
+	  Support for the TCSR clock controller on Nord devices.
+	  Say Y if you want to use peripheral devices such as PCIe, USB, UFS etc.
+
 config CLK_SHIKRA_AUDIOCORECC
 	tristate "Shikra Audio Core Clock Controller"
 	depends on ARM64 || COMPILE_TEST
@@ -233,17 +252,6 @@ config CLK_SHIKRA_GCC
 	  Say Y if you want to use multimedia devices or peripheral
 	  devices such as Camera, Video, UART, SPI, I2C, USB, SD/eMMC etc.
 
-config CLK_NORD_GPUCC
-	tristate "Nord Graphics Clock Controller"
-	depends on ARM64 || COMPILE_TEST
-	select CLK_NORD_GCC
-	default m if ARCH_QCOM
-	help
-	  Support for the graphics clock controllers on Nord devices. There are two
-	  graphics clock controllers on Nord SoC.
-	  Say Y if you want to support graphics controller devices and
-	  functionality such as 3D graphics.
-
 config CLK_X1E80100_CAMCC
 	tristate "X1E80100 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
@@ -895,14 +903,6 @@ config QCS_GCC_404
 	  Say Y if you want to use multimedia devices or peripheral
 	  devices such as UART, SPI, I2C, USB, SD/eMMC, PCIe etc.
 
-config CLK_NORD_TCSRCC
-	tristate "Nord TCSR Clock Controller"
-	depends on ARM64 || COMPILE_TEST
-	default m if ARCH_QCOM
-	help
-	  Support for the TCSR clock controller on Nord devices.
-	  Say Y if you want to use peripheral devices such as PCIe, USB, UFS etc.
-
 config SA_CAMCC_8775P
 	tristate "SA8775P Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
-- 
2.43.0