Re: [PATCH v9 2/2] iio: adc: add MAX40080 current-sense amplifier driver

[Andy Shevchenko]

On Mon, Aug 31, 2026 at 04:43:34PM +0300, Stefan Popa wrote:
> The MAX40080 is a bidirectional current-sense amplifier with an
> integrated 12-bit ADC and an I2C/SMBus interface. It measures the
> voltage across an external shunt resistor and the input bus voltage,
> storing the results in an internal FIFO.
> 
> Add a direct-mode IIO driver exposing the current and voltage channels
> with raw, scale and hardware-gain attributes, a configurable
> oversampling (digital averaging) ratio, and PEC-protected register
> access. The current scale is derived from the shunt resistor value
> described in the device tree.
> 
> The driver operates in single-measurement mode: each raw read triggers
> an on-demand conversion via SMBus Quick Command and returns a matched
> current/voltage pair. This avoids the latency and complexity of the
> continuous FIFO mode while ensuring each read reflects the current
> state. The two selectable current-sense ranges are exposed through
> scale/scale_available.
> 
> Continuous FIFO buffering, threshold events and the alert interrupt are
> intentionally left out of this initial submission and may be added
> later.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>

-- 
With Best Regards,
Andy Shevchenko