[PATCH v8 2/2] arm64: dts: qcom: sdm845-google: Enable PMI8998 camera flash LEDs

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@xxxxxxx>

Enable the PMI8998 flash LED block and describe two white flash LEDs
used for the rear camera.

Configure the LED in flash mode with hardware limits matching the
original device configuration, including maximum current and timeout.

In contrary to downstream, we can control both LEDs separately.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi
index 913e2032e6472..365fd6d9287e1 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi
@@ -1,16 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 /dts-v1/;
 
 #include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/media/video-interface-devices.h>
 #include <dt-bindings/media/video-interfaces.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "sdm845.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
 
@@ -591,16 +592,42 @@ &pm8998_resin {
 };
 
 &pmi8998_charger {
 	monitored-battery = <&battery>;
 
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	/* upper part of the flash module */
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	/* lower part of the flash module */
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
 
 &qupv3_id_1 {
 	status = "okay";
 };
 

-- 
2.55.0