[PATCH v8 2/2] mfd: ac200: Add X-Powers AC200 support

[James Hilliard]

The X-Powers AC200 is a mixed-signal companion IC with a paged register
map accessed over I2C.

Enable and rate-lock the shared input clock, wait 40 ms before the first
register access, initialize the paged regmap and reset the chip. Assert
reset again during driver removal and system shutdown.

The Ethernet PHY is enumerated on its MDIO bus rather than as an MFD
child. It follows the x-powers,ac200 phandle and uses this regmap for
ancillary package-control access. Other AC200 functions can be added as
MFD children.

Cache only the common page selector. Individual functions can reset
independently and invalidate their other registers, so leave all
functional registers volatile.

Signed-off-by: James Hilliard <james.hilliard1@xxxxxxxxx>
---
 drivers/mfd/Kconfig  |  11 +++++
 drivers/mfd/Makefile |   1 +
 drivers/mfd/ac200.c  | 136 +++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 148 insertions(+)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e4fd4572472f..cac3fff5aee9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -205,6 +205,17 @@ config MFD_AC100
 	  This driver include only the core APIs. You have to select individual
 	  components like codecs or RTC under the corresponding menus.
 
+config MFD_AC200
+	tristate "X-Powers AC200"
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	help
+	  Support for the X-Powers AC200 mixed-signal companion IC. The AC200
+	  contains audio, video, RTC and Fast Ethernet PHY functions and is
+	  co-packaged with some Allwinner H6 and H616 SoCs. This driver provides
+	  the shared register access used by the individual function drivers.
+
 config MFD_AXP20X
 	tristate
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 72d3944b0ad8..f8101d2a9ce9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -150,6 +150,7 @@ obj-$(CONFIG_MFD_DA9052_SPI)	+= da9052-spi.o
 obj-$(CONFIG_MFD_DA9052_I2C)	+= da9052-i2c.o
 
 obj-$(CONFIG_MFD_AC100)		+= ac100.o
+obj-$(CONFIG_MFD_AC200)		+= ac200.o
 obj-$(CONFIG_MFD_AXP20X)	+= axp20x.o
 obj-$(CONFIG_MFD_AXP20X_I2C)	+= axp20x-i2c.o
 obj-$(CONFIG_MFD_AXP20X_RSB)	+= axp20x-rsb.o
diff --git a/drivers/mfd/ac200.c b/drivers/mfd/ac200.c
new file mode 100644
index 000000000000..8445a460ef6c
--- /dev/null
+++ b/drivers/mfd/ac200.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MFD core driver for the X-Powers AC200
+ *
+ * Copyright (C) 2019 Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
+ * Copyright (C) 2026 James Hilliard <james.hilliard1@xxxxxxxxx>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#define AC200_SYS_CONTROL_REG			0x0002
+#define AC200_SYS_CONTROL_CHIP_RESET_DEASSERT	BIT(0)
+
+/* Interface register accessible from every register page. */
+#define AC200_TWI_REG_ADDR_H	0x00fe
+#define AC200_MAX_REG		0xa1f2
+
+static const struct regmap_range_cfg ac200_range_cfg[] = {
+	{
+		.range_max = AC200_MAX_REG,
+		.selector_reg = AC200_TWI_REG_ADDR_H,
+		.selector_mask = 0xff,
+		.window_len = 256,
+	},
+};
+
+/*
+ * Each AC200 sub-block can reset independently, invalidating its register
+ * contents without regmap's knowledge. Cache only the common page selector;
+ * this avoids a selector read-modify-write for every access on the same page
+ * without ever returning stale functional-register values.
+ */
+static bool ac200_volatile_reg(struct device *dev, unsigned int reg)
+{
+	return reg != AC200_TWI_REG_ADDR_H;
+}
+
+static const struct regmap_config ac200_regmap_config = {
+	.name = "ac200",
+	.reg_bits = 8,
+	.reg_stride = 2,
+	.val_bits = 16,
+	.ranges = ac200_range_cfg,
+	.num_ranges = ARRAY_SIZE(ac200_range_cfg),
+	.max_register = AC200_MAX_REG,
+	.volatile_reg = ac200_volatile_reg,
+	.cache_type = REGCACHE_MAPLE,
+};
+
+static void ac200_disable(struct regmap *regmap)
+{
+	regmap_write(regmap, AC200_SYS_CONTROL_REG, 0);
+}
+
+static int ac200_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct regmap *regmap;
+	struct clk *clk;
+	int ret;
+
+	clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(clk))
+		return dev_err_probe(dev, PTR_ERR(clk),
+				     "failed to enable input clock\n");
+
+	ret = devm_clk_rate_exclusive_get(dev, clk);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to lock clock rate\n");
+
+	regmap = devm_regmap_init_i2c(client, &ac200_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "failed to initialize regmap\n");
+
+	i2c_set_clientdata(client, regmap);
+
+	/*
+	 * No minimum delay is documented. Match the vendor driver's 40 ms delay
+	 * before its first AC200 register access after enabling the input clock.
+	 */
+	msleep(40);
+
+	ret = regmap_write(regmap, AC200_SYS_CONTROL_REG, 0);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, AC200_SYS_CONTROL_REG,
+			   AC200_SYS_CONTROL_CHIP_RESET_DEASSERT);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void ac200_remove(struct i2c_client *client)
+{
+	ac200_disable(i2c_get_clientdata(client));
+}
+
+static void ac200_shutdown(struct i2c_client *client)
+{
+	ac200_disable(i2c_get_clientdata(client));
+}
+
+static const struct of_device_id ac200_of_match[] = {
+	{ .compatible = "x-powers,ac200" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ac200_of_match);
+
+static const struct i2c_device_id ac200_i2c_ids[] = {
+	{ .name = "ac200" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ac200_i2c_ids);
+
+static struct i2c_driver ac200_driver = {
+	.driver = {
+		.name = "ac200",
+		.of_match_table = ac200_of_match,
+	},
+	.probe = ac200_probe,
+	.remove = ac200_remove,
+	.shutdown = ac200_shutdown,
+	.id_table = ac200_i2c_ids,
+};
+module_i2c_driver(ac200_driver);
+
+MODULE_AUTHOR("James Hilliard <james.hilliard1@xxxxxxxxx>");
+MODULE_DESCRIPTION("X-Powers AC200 MFD core driver");
+MODULE_LICENSE("GPL");

-- 
2.53.0