[PATCH] dt-bindings: maxim-ds1302: Convert to dt schema

[Sudheendra Sampath]

Convert Maxim DS1302 real-time clock binding to DT schema.

Signed-off-by: Sudheendra Sampath <giveback4fun@xxxxxxxxx>
---
 .../devicetree/bindings/rtc/maxim-ds1302.txt  | 46 -----------
 .../devicetree/bindings/rtc/maxim-ds1302.yaml | 81 +++++++++++++++++++
 2 files changed, 81 insertions(+), 46 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/rtc/maxim-ds1302.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/maxim-ds1302.yaml

diff --git a/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt b/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt
deleted file mode 100644
index ba470c56cdec..000000000000
--- a/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Maxim/Dallas Semiconductor DS-1302 RTC
-
-Simple device which could be used to store date/time between reboots.
-
-The device uses the standard MicroWire half-duplex transfer timing.
-Master output is set on low clock and sensed by the RTC on the rising
-edge. Master input is set by the RTC on the trailing edge and is sensed
-by the master on low clock.
-
-Required properties:
-
-- compatible : Should be "maxim,ds1302"
-
-Required SPI properties:
-
-- reg : Should be address of the device chip select within
-  the controller.
-
-- spi-max-frequency : DS-1302 has 500 kHz if powered at 2.2V,
-  and 2MHz if powered at 5V.
-
-- spi-3wire : The device has a shared signal IN/OUT line.
-
-- spi-lsb-first : DS-1302 requires least significant bit first
-  transfers.
-
-- spi-cs-high: DS-1302 has active high chip select line. This is
-  required unless inverted in hardware.
-
-Example:
-
-spi@901c {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "icpdas,lp8841-spi-rtc";
-	reg = <0x901c 0x1>;
-
-	rtc@0 {
-		compatible = "maxim,ds1302";
-		reg = <0>;
-		spi-max-frequency = <500000>;
-		spi-3wire;
-		spi-lsb-first;
-		spi-cs-high;
-	};
-};
diff --git a/Documentation/devicetree/bindings/rtc/maxim-ds1302.yaml b/Documentation/devicetree/bindings/rtc/maxim-ds1302.yaml
new file mode 100644
index 000000000000..3e6264464e10
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/maxim-ds1302.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/maxim-ds1302.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim/Dallas Semiconductor DS-1302 RTC
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
+
+description: |
+  Simple device which could be used to store date/time between reboots.
+
+  The device uses the standard MicroWire half-duplex transfer timing.
+  Master output is set on low clock and sensed by the RTC on the rising
+  edge. Master input is set by the RTC on the trailing edge and is sensed
+  by the master on low clock.
+
+properties:
+  compatible:
+    items:
+      # Maxim DS1302 Real-time Clock
+      - const: maxim,ds1302
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Maximum SPI clocking speed in Hz.
+    enum:
+      - 500000
+      - 2000000
+
+  spi-3wire: true
+
+  spi-lsb-first: true
+
+  spi-cs-high: true
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - spi-3wire
+  - spi-lsb-first
+  - spi-cs-high
+
+additionalProperties: false
+
+examples:
+  - |
+    spi1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@0 {
+            compatible = "maxim,ds1302";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+            spi-3wire;
+            spi-lsb-first;
+            spi-cs-high;
+        };
+    };
+
+  - |
+    spi2 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@2000 {
+            compatible = "maxim,ds1302";
+            reg = <0x2000>;
+            spi-max-frequency = <2000000>;
+            spi-3wire;
+            spi-lsb-first;
+            spi-cs-high;
+        };
+    };
-- 
2.47.3