Re: [PATCH net v3] net: phy: air_en8811h: restore AN8811HB LED GPIO after MCU restart

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Sat, 29 Aug 2026 11:38:43 +0800 you wrote:
> Commit 03b4702fc5e3 ("net: phy: air_en8811h: move LED GPIO
> configuration to config_init") moved the EN8811H LED GPIO setup from
> probe to config_init because an MD32 restart clears the output-enable
> bits.
> 
> AN8811HB follows the same initialization sequence: an8811hb_probe()
> enables GPIO3/4/5, and later config_init() calls restart MD32.
> 
> [...]

Here is the summary with links:
  - [net,v3] net: phy: air_en8811h: restore AN8811HB LED GPIO after MCU restart
    https://git.kernel.org/netdev/net-next/c/3498acda6b68

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html