[PATCH 0/2] arm64: dts: freescale: imx95: Add ENETC port 2 in SGMII mode on Toradex boards

[Franz Schnyder]

Add the ENETC port 2 on Toradex SMARC and Aquila iMX95. The port
is connected as an SGMII Ethernet interface.

Enable the reference clock on the modules and enable the PHY connections
on the supported carrier boards.

Signed-off-by: Franz Schnyder <franz.schnyder@xxxxxxxxxxx>
---
Franz Schnyder (2):
      arm64: dts: freescale: imx95-toradex-smarc: Add ENETC port 2 in SGMII mode
      arm64: dts: freescale: imx95-aquila: Add ENETC port 2 in SGMII mode

 arch/arm64/boot/dts/freescale/imx95-aquila-clover.dts  | 18 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx95-aquila-dev.dts     | 18 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx95-aquila.dtsi        |  7 +++++++
 .../boot/dts/freescale/imx95-toradex-smarc-dev.dts     |  8 ++++++++
 arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi |  7 +++++++
 5 files changed, 58 insertions(+)
---
base-commit: ff1bb9ccce43cd06c766c3ddef796a7e40e623fe
change-id: 20260902-add-enetc-port2-735526a9ef2c

Best regards,
--  
Franz Schnyder <franz.schnyder@xxxxxxxxxxx>