[PATCH v2 2/2] dt-bindings: serial: Document WK2xxx SPI UART bindings
From: zjzhao
Date: Fri Sep 04 2026 - 05:42:03 EST
From: zjzhao <zjzhao@xxxxxxxxx>
Add a DT binding for the WK2xxx SPI to UART bridge ICs (WK2124, WK2132,
WK2168, WK2202 and WK2204) from WKmic (Chengdu Weikai Microelectronics).
Each UART channel is described by a serial@N child node that carries its
own serial and RS-485 properties. Also register the wkmic vendor prefix.
Signed-off-by: zjzhao <zjzhao@xxxxxxxxx>
---
.../bindings/serial/wkmic,wk2xxx.yaml | 115 ++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
2 files changed, 117 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/wkmic,wk2xxx.yaml
diff --git a/Documentation/devicetree/bindings/serial/wkmic,wk2xxx.yaml b/Documentation/devicetree/bindings/serial/wkmic,wk2xxx.yaml
new file mode 100644
index 000000000000..c781482c0f2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/wkmic,wk2xxx.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/wkmic,wk2xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WKmic WK2xxx SPI to UART bridge
+
+maintainers:
+ - EDATEC Technology Co., Ltd. <zjzhao@xxxxxxxxx>
+
+description:
+ The WK2xxx family (WK2124, WK2132, WK2168, WK2202 and WK2204) are SPI to
+ UART bridge ICs from WKmic (Chengdu Weikai Microelectronics). Each IC
+ exposes two or four full-duplex UART channels with 256-byte RX/TX FIFOs
+ through a single SPI slave interface and one interrupt line. Each channel
+ is described by a "serial@N" child node that carries its own serial and
+ RS-485 properties.
+
+properties:
+ compatible:
+ enum:
+ - wkmic,wk2124
+ - wkmic,wk2132
+ - wkmic,wk2168
+ - wkmic,wk2202
+ - wkmic,wk2204
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ When missing, the device driver uses polling instead.
+ maxItems: 1
+
+ clock-frequency:
+ description:
+ Crystal or external clock frequency for the IC in Hz. The WK2xxx has
+ no internal clock, so this must match the connected crystal.
+ default: 11059200
+ minimum: 1
+ maximum: 30000000
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^serial@[0-3]$":
+ type: object
+ description: A single UART channel of the chip.
+ allOf:
+ - $ref: /schemas/serial/serial.yaml#
+ - $ref: /schemas/serial/rs485.yaml#
+ properties:
+ reg:
+ description: UART channel number on the chip.
+ maximum: 3
+ required:
+ - reg
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - wkmic,wk2132
+ - wkmic,wk2202
+ then:
+ patternProperties:
+ "^serial@[23]$": false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ serial@0 {
+ compatible = "wkmic,wk2132";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ clock-frequency = <11059200>;
+ interrupt-parent = <&gpio>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ serial@0 {
+ reg = <0>;
+ };
+
+ serial@1 {
+ reg = <1>;
+ rs485-rts-active-low;
+ linux,rs485-enabled-at-boot-time;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ba2002969373..654fc8525559 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1907,6 +1907,8 @@ patternProperties:
description: Wireless Tag (qiming yunduan)
"^wits,.*":
description: Shenzhen Merrii Technology Co., Ltd. (WITS)
+ "^wkmic,.*":
+ description: Chengdu Weikai Microelectronics Co., Ltd.
"^wlf,.*":
description: Wolfson Microelectronics
"^wm,.*":
--
2.43.0