[PATCH v3 6/6] arm64: dts: qcom: qcs6490-rubikpi3: Add audio support
From: Hongyang Zhao
Date: Fri Sep 04 2026 - 06:50:48 EST
RubikPi 3 uses the AudioReach firmware path for its external audio
interfaces. Primary MI2S connects to an ES8316 codec for headset playback
and capture, while quaternary MI2S feeds the LT9611 HDMI bridge.
Describe the ES8316 supplies, MCLK, jack detection and audio routing, and
add the primary and quaternary MI2S links. The 1.8 V and 3.3 V codec
supplies are both controlled by GPIO117.
Signed-off-by: Hongyang Zhao <hongyang.zhao@xxxxxxxxxxxxxxx>
---
.../boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts | 169 +++++++++++++++++++++
1 file changed, 169 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts
index 0f21777c480b..10277bee86b3 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts
@@ -19,6 +19,7 @@
#include "pm7325.dtsi"
#include "pm8350c.dtsi" /* PM7350C */
#include "pmk8350.dtsi" /* PMK7325 */
+#include "qcs6490-audioreach.dtsi"
/delete-node/ &adsp_mem;
/delete-node/ &cdsp_mem;
@@ -128,6 +129,33 @@ fan0: pwm-fan {
pinctrl-names = "default";
};
+ vreg_es8316_1v8: regulator-es8316-1v8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg_es8316_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&es8316_power_on>;
+ pinctrl-names = "default";
+
+ vin-supply = <&vreg_l18b_1p8>;
+ };
+
+ vreg_es8316_3v3: regulator-es8316-3v3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg_es8316_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
vreg_eth_1v8: regulator-eth-1v8 {
compatible = "regulator-fixed";
@@ -743,6 +771,30 @@ &gpu_zap_shader {
firmware-name = "qcom/qcs6490/a660_zap.mbn";
};
+&i2c0 {
+ status = "okay";
+
+ es8316: audio-codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ #sound-dai-cells = <0>;
+
+ clocks = <&q6prmcc LPASS_CLK_ID_MCLK_1 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "mclk";
+
+ interrupts-extended = <&tlmm 63 IRQ_TYPE_LEVEL_HIGH>;
+ avdd-supply = <&vreg_es8316_3v3>;
+ cpvdd-supply = <&vreg_es8316_1v8>;
+ dvdd-supply = <&vreg_es8316_1v8>;
+ pvdd-supply = <&vreg_es8316_1v8>;
+
+ pinctrl-0 = <&es8316_jack_detect>;
+ pinctrl-names = "default";
+
+ everest,jack-detect-inverted;
+ };
+};
+
/* Pin 3, 5 in 40-pin connector */
&i2c1 {
status = "okay";
@@ -756,6 +808,7 @@ &i2c9 {
lt9611_codec: hdmi-bridge@39 {
compatible = "lontium,lt9611";
reg = <0x39>;
+ #sound-dai-cells = <1>;
interrupts-extended = <&tlmm 20 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
@@ -994,6 +1047,23 @@ &pon_resin {
status = "okay";
};
+&q6apmbedai {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dai@10 {
+ reg = <PRIMARY_MI2S_RX>;
+ clocks = <&q6prmcc LPASS_CLK_ID_PRI_MI2S_IBIT LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "bclk";
+ };
+
+ dai@11 {
+ reg = <PRIMARY_MI2S_TX>;
+ clocks = <&q6prmcc LPASS_CLK_ID_PRI_MI2S_IBIT LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "bclk";
+ };
+};
+
&qupv3_id_0 {
firmware-name = "qcom/qcm6490/qupv3fw.elf";
@@ -1030,6 +1100,69 @@ &sdhc_2 {
status = "okay";
};
+&sound {
+ compatible = "thundercomm,qcs6490-rubikpi3-sndcard";
+ model = "QCS6490-Thundercomm-RubikPi3";
+
+ pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>,
+ <&mi2s0_sclk>, <&mi2s0_ws>,
+ <&lpass_qua_mi2s_sclk>, <&lpass_qua_mi2s_ws>,
+ <&lpass_qua_mi2s_data>;
+ pinctrl-names = "default";
+
+ audio-routing = "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR",
+ "MIC2", "Mic Jack";
+
+ mi2s-capture-dai-link {
+ link-name = "Primary MI2S Capture";
+
+ codec {
+ sound-dai = <&es8316>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai PRIMARY_MI2S_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ mi2s-playback-dai-link {
+ link-name = "Primary MI2S Playback";
+
+ codec {
+ sound-dai = <&es8316>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ quaternary-mi2s-playback-dai-link {
+ link-name = "HDMI Playback";
+
+ codec {
+ sound-dai = <<9611_codec 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai QUATERNARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+};
+
/* Pin 19, 21, 23, 24 in 40-pin connector */
&spi12 {
status = "okay";
@@ -1244,6 +1377,29 @@ &sdc2_data {
drive-strength = <10>;
};
+&lpass_tlmm {
+ lpass_qua_mi2s_sclk: qua-mi2s-sclk-state {
+ pins = "gpio0";
+ function = "qua_mi2s_sclk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ lpass_qua_mi2s_ws: qua-mi2s-ws-state {
+ pins = "gpio1";
+ function = "qua_mi2s_ws";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ lpass_qua_mi2s_data: qua-mi2s-data-state {
+ pins = "gpio2", "gpio3", "gpio4";
+ function = "qua_mi2s_data";
+ drive-strength = <8>;
+ bias-disable;
+ };
+};
+
&tlmm {
pcie1_reset_n: pcie1-reset-n-state {
pins = "gpio2";
@@ -1389,6 +1545,12 @@ m2_vcc_pin: m2-vcc-state {
input-disable;
};
+ es8316_jack_detect: es8316-jack-detect-state {
+ pins = "gpio63";
+ function = "gpio";
+ bias-disable;
+ };
+
lt9611_vcc_pin: lt9611-vcc-pin-state {
pins = "gpio83";
function = "gpio";
@@ -1418,6 +1580,13 @@ pcie0_wake_n: pcie0-wake-n-state {
bias-pull-up;
};
+ es8316_power_on: es8316-power-on-state {
+ pins = "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
wifi_power_on: wifi-power-on-state {
pins = "gpio125";
function = "gpio";
--
2.43.0