[PATCH 2/2] arm64: dts: allwinner: orangepi-zero3: enable HDMI output

[Barzin Lotfabadi]

The Orange Pi Zero 3 exposes the H618 HDMI transmitter on a micro-HDMI
connector.  Add the connector node, wire it to the HDMI transmitter's
output port, and enable the display pipeline.

Tested on an Orange Pi Zero 3 (H618, 4GB): the sink's EDID is read
correctly and the board drives a 1920x1080@60Hz desktop.


Signed-off-by: Barzin Lotfabadi <barzin221@xxxxxxxxx>
---
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
index c51d4d912..444773e4a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -11,6 +11,17 @@
 / {
 	model = "OrangePi Zero3";
 	compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
 };
 
 &cpu0 {
@@ -103,3 +114,17 @@ &pio {
 	vcc-ph-supply = <&reg_dldo1>;
 	vcc-pi-supply = <&reg_dldo1>;
 };
+
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};

-- 
2.51.0