[PATCH 1/3] clk: qcom: clk-alpha-pll: support a 28-bit ALPHA_VAL width

[Taniya Das]

On some PLLs the PLL_ALPHA_VAL register has been increased to 28 bits to
carry the fractional word at a finer resolution, for example the
ZONDA_OLE instances on the Qualcomm Nord DPRX. The alpha-PLL core,
however, derives the ALPHA_VAL width solely from the register-map layout
and can only express 16 or 40 bits, so it programs and reads back the
28-bit configuration at the wrong scale on both the set_rate/slew and
recalc_rate paths, making the PLL lock to and report the wrong rate.

Add a way to identify the wider register: an optional alpha_width field
in struct clk_alpha_pll that, when non-zero, supersedes the
register-derived width. This feeds pll_alpha_width(), so the recalc_rate
and round_rate math scale the fractional word correctly, and the Zonda
set_rate L-adjust MSB check is derived from the active width instead of
a hardcoded BIT(15). PLLs that leave the field zero retain the previous
behaviour.

Signed-off-by: Taniya Das <taniya.das@xxxxxxxxxxxxxxxx>
---
 drivers/clk/qcom/clk-alpha-pll.c | 7 ++++---
 drivers/clk/qcom/clk-alpha-pll.h | 3 +++
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 60173b076cc5f16bb55343a1d1136eb07f3c050f..981f973da02f379832fdc0cded3f2b4cae5879e4 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -382,8 +382,9 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 #define ZONDA_PLL_FREQ_LOCK_DET	BIT(29)
 
 #define pll_alpha_width(p)					\
-		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
-				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
+		((p)->alpha_width ? (p)->alpha_width :		\
+		 ((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
+				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH))
 
 #define pll_has_64bit_config(p)	((PLL_CONFIG_CTL_U(p) - PLL_CONFIG_CTL(p)) == 4)
 
@@ -2290,7 +2291,7 @@ static int clk_zonda_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (ret < 0)
 		return ret;
 
-	if (a & PLL_ALPHA_MSB)
+	if (a & BIT(alpha_width - 1))
 		zonda_pll_adjust_l_val(rate, prate, &l);
 
 	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 3a2157bebc52cd15f55381a068953f21be18f6bb..ab3b4f4fc7501df0fa3f59d741d64646383e4cfd 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -86,6 +86,8 @@ struct pll_vco {
  * struct clk_alpha_pll - phase locked loop (PLL)
  * @offset: base address of registers
  * @regs: alpha pll register map (see @clk_alpha_pll_regs)
+ * @alpha_width: optional override of the ALPHA_VAL width in bits;
+ *		 0 means derive the width from @regs
  * @config: array of pll settings
  * @vco_table: array of VCO settings
  * @num_vco: number of VCO settings in @vco_table
@@ -95,6 +97,7 @@ struct pll_vco {
 struct clk_alpha_pll {
 	u32 offset;
 	const u8 *regs;
+	u32 alpha_width;
 
 	const struct alpha_pll_config *config;
 	const struct pll_vco *vco_table;

-- 
2.34.1