[PATCH 2/6] arm64: dts: qcom: glymur: Add CCI definitions for Glymur

[Nihal Kumar Gupta]

Qualcomm Glymur SoC has two Camera Control Interface (CCI)
controllers. Each controller contains two I2C hosts.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Nihal Kumar Gupta <nihal.gupta@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/glymur.dtsi | 202 +++++++++++++++++++++++++++++++++++
 1 file changed, 202 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index c463cde46cc41acd7b8091616657bf49b38b7f9f..4c48df593d1834a6ee7d97c9981965f557cad16c 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -1886,6 +1886,80 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
 			};
 		};
 
+		cci0: cci@ac15000 {
+			compatible = "qcom,glymur-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac15000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 456 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "ahb",
+				      "cci";
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci0_0_default>, <&cci0_1_default>;
+			pinctrl-1 = <&cci0_0_sleep>, <&cci0_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,glymur-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac16000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 859 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "ahb",
+				      "cci";
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci1_0_default>, <&cci1_1_default>;
+			pinctrl-1 = <&cci1_0_sleep>, <&cci1_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camss: isp@acb6000 {
 			compatible = "qcom,glymur-camss";
 
@@ -7015,6 +7089,134 @@ rx-pins {
 					bias-disable;
 				};
 			};
+
+			cci0_0_default: cci0-0-default-state {
+				sda-pins {
+					pins = "gpio101";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio102";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_0_sleep: cci0-0-sleep-state {
+				sda-pins {
+					pins = "gpio101";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio102";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci0_1_default: cci0-1-default-state {
+				sda-pins {
+					pins = "gpio103";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio104";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_1_sleep: cci0-1-sleep-state {
+				sda-pins {
+					pins = "gpio103";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio104";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_0_default: cci1-0-default-state {
+				sda-pins {
+					pins = "gpio105";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio106";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci1_0_sleep: cci1-0-sleep-state {
+				sda-pins {
+					pins = "gpio105";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio106";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_1_default: cci1-1-default-state {
+				sda-pins {
+					pins = "gpio235";
+					function = "asc_cci";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio236";
+					function = "asc_cci";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci1_1_sleep: cci1-1-sleep-state {
+				sda-pins {
+					pins = "gpio235";
+					function = "asc_cci";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio236";
+					function = "asc_cci";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
 		};
 
 		ctcu@10001000 {

-- 
2.34.1