[PATCH v2 1/7] drm/msm/hdmi_phy: Cleanup after msm_hdmi_phy_resource_enable() failure

[Krzysztof Kozlowski]

If msm_hdmi_phy_resource_enable() fails, e.g. when enabling regulators,
it should reverse the state of things already changed.
msm_hdmi_phy_resource_enable() is used also in probe path, thus such
failure, which could be simple deferred probe, would leave these
resources permanently enabled for the rest of the runtime.

Cc: <stable@xxxxxxxxxxxxxxx>
Fixes: 15b4a4523859 ("drm/msm/hdmi: Create a separate HDMI PHY driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
index eb1088755cb3..fd675f537f2b 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
@@ -67,16 +67,26 @@ int msm_hdmi_phy_resource_enable(struct hdmi_phy *phy)
 	ret = regulator_bulk_enable(cfg->num_regs, phy->regs);
 	if (ret) {
 		DRM_DEV_ERROR(dev, "failed to enable regulators: (%d)\n", ret);
-		return ret;
+		goto err_pm_put;
 	}
 
 	for (i = 0; i < cfg->num_clks; i++) {
 		ret = clk_prepare_enable(phy->clks[i]);
-		if (ret)
+		if (ret) {
 			DRM_DEV_ERROR(dev, "failed to enable clock: %s (%d)\n",
 				cfg->clk_names[i], ret);
+			goto err_clk_unprepare;
+		}
 	}
 
+	return 0;
+
+err_clk_unprepare:
+	for (; i > 0; i--)
+		clk_disable_unprepare(phy->clks[i - 1]);
+err_pm_put:
+	pm_runtime_put_sync(dev);
+
 	return ret;
 }
 

-- 
2.53.0