[PATCH v8 7/9] iio: accel: mma8452: Allow open drain interrupt pin configuration

[Esben Haabendal]

When designing systems sharing the interrupt for mma8452 chips, it is
helpful to be able to configure the irq pin in open-drain mode (default is
push-pull).

Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
Signed-off-by: Esben Haabendal <esben@xxxxxxxxxx>
---
 drivers/iio/accel/mma8452.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 2c1b97b77bc1..b5ab85a86e72 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -83,6 +83,8 @@
 #define  MMA8452_CTRL_REG2_RST			BIT(6)
 #define  MMA8452_CTRL_REG2_MODS_SHIFT		3
 #define  MMA8452_CTRL_REG2_MODS_MASK		0x1b
+#define MMA8452_CTRL_REG3			0x2c
+#define  MMA8452_CTRL_REG3_PP_OD		BIT(0)
 #define MMA8452_CTRL_REG4			0x2d
 #define MMA8452_CTRL_REG5			0x2e
 #define MMA8452_OFF_X				0x2f
@@ -136,6 +138,7 @@ struct mma8452_data {
 	int sleep_val;
 	u8 ctrl_reg1;
 	u8 data_cfg;
+	bool open_drain;
 };
 
 /**
@@ -659,6 +662,22 @@ static int mma8452_set_power_mode(struct mma8452_data *data, u8 mode)
 	return mma8452_change_config(data, MMA8452_CTRL_REG2, reg);
 }
 
+static int mma8452_set_interrupt_pin_mode(struct mma8452_data *data)
+{
+	int reg;
+
+	reg = i2c_smbus_read_byte_data(data->client, MMA8452_CTRL_REG3);
+	if (reg < 0)
+		return reg;
+
+	if (data->open_drain)
+		reg |= MMA8452_CTRL_REG3_PP_OD;
+	else
+		reg &= ~MMA8452_CTRL_REG3_PP_OD;
+
+	return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG3, reg);
+}
+
 /* returns >0 if in freefall mode, 0 if not or <0 if an error occurred */
 static int mma8452_freefall_mode_enabled(struct mma8452_data *data)
 {
@@ -1665,6 +1684,11 @@ static int mma8452_probe(struct i2c_client *client)
 			goto disable_regulators;
 	}
 
+	data->open_drain = device_property_read_bool(dev, "drive-open-drain");
+	ret = mma8452_set_interrupt_pin_mode(data);
+	if (ret)
+		goto trigger_cleanup;
+
 	data->ctrl_reg1 = MMA8452_CTRL_ACTIVE |
 			  (MMA8452_CTRL_DR_DEFAULT << MMA8452_CTRL_DR_SHIFT);
 
@@ -1792,6 +1816,10 @@ static int mma8452_runtime_resume(struct device *dev)
 		return ret;
 	}
 
+	ret = mma8452_set_interrupt_pin_mode(data);
+	if (ret)
+		goto runtime_resume_failed;
+
 	ret = mma8452_active(data);
 	if (ret < 0)
 		goto runtime_resume_failed;

-- 
2.55.0