Re: [PATCH v10 1/2] dt-bindings: mfd: x-powers: Add AC200

[Conor Dooley]

On Sun, Sep 06, 2026 at 04:30:46PM -0600, James Hilliard wrote:
> The AC200 is an I2C-controlled mixed-signal companion IC containing
> audio, video, RTC and Fast Ethernet PHY functions.
> 
> Describe the parent device and its shared input clock together with the
> audio codec and TV encoder child nodes. Keep their analog supplies on the
> function consumers and describe the TV encoder display graph and optional
> bandgap calibration cell.
> 
> Add the shared interrupt-controller properties and interrupt numbers used
> by the TV encoder. The Ethernet PHY is represented by a PHY package on its
> MDIO bus, with a phandle back to this device for access to the package
> control registers, so it does not require an MFD child node.
> 
> Keep the INTB connection and TV encoder interrupt optional, including when
> the TV encoder is enabled. Cable detection status is readable over I2C
> without an interrupt. If a TV encoder interrupt is described, require the
> parent interrupt domain and its upstream connection. Include examples
> with and without INTB connected.
> 
> The input clock must run at 24 or 27 MHz when the Ethernet PHY is used,
> matching the rates encoded by its documented clock selector.

> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>

This should have been dropped when you merged the patches.
Not sure why you sent v10 without waiting for a reply from me on the v9.

Thanks,
Conor.

> Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
> Signed-off-by: James Hilliard <james.hilliard1@xxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/x-powers,ac200.yaml    | 231 +++++++++++++++++++++
>  MAINTAINERS                                        |   8 +
>  include/dt-bindings/mfd/x-powers,ac200.h           |  13 ++
>  3 files changed, 252 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/x-powers,ac200.yaml b/Documentation/devicetree/bindings/mfd/x-powers,ac200.yaml
> new file mode 100644
> index 000000000000..0f2e6922fc4f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/x-powers,ac200.yaml
> @@ -0,0 +1,231 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/x-powers,ac200.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: X-Powers AC200 mixed-signal IC
> +
> +maintainers:
> +  - James Hilliard <james.hilliard1@xxxxxxxxx>
> +  - Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
> +
> +description:
> +  The AC200 is a mixed-signal companion IC containing audio, video, RTC and
> +  Fast Ethernet PHY functions. Its control registers are accessed over I2C.
> +
> +properties:
> +  compatible:
> +    const: x-powers,ac200
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description:
> +      AC200 input clock. When using the Ethernet PHY, its configured rate must
> +      be 24 or 27 MHz, matching the rates encoded by the documented EPHY clock
> +      selector.
> +
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      The shared open-drain INTB output for the TV encoder, Ethernet PHY and
> +      RTC interrupts. Omit when INTB is not connected.
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 1
> +    description:
> +      The interrupt number, as defined in
> +      include/dt-bindings/mfd/x-powers,ac200.h.
> +
> +  codec:
> +    type: object
> +    $ref: /schemas/sound/dai-common.yaml#
> +    unevaluatedProperties: false
> +
> +    properties:
> +      compatible:
> +        const: x-powers,ac200-codec
> +
> +      '#sound-dai-cells':
> +        const: 0
> +
> +      ac-ldoin-supply:
> +        description: The 3.3 V supply for the audio codec LDO input.
> +
> +    required:
> +      - compatible
> +      - '#sound-dai-cells'
> +      - ac-ldoin-supply
> +
> +  tv-encoder:
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      compatible:
> +        const: x-powers,ac200-tve
> +
> +      interrupts:
> +        maxItems: 1
> +        description:
> +          Cable detection interrupt routed through the AC200 interrupt
> +          controller. Omit when INTB is not connected. Cable detection status
> +          can also be read over I2C without an interrupt.
> +
> +      tv-vcc-supply:
> +        description: The 3.3 V supply for the composite-video DAC.
> +
> +      nvmem-cells:
> +        maxItems: 1
> +
> +      nvmem-cell-names:
> +        items:
> +          - const: bandgap
> +
> +      ports:
> +        $ref: /schemas/graph.yaml#/properties/ports
> +
> +        properties:
> +          port@0:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: Input from the display pipeline, carrying CCIR656.
> +
> +          port@1:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: Output to the composite-video connector.
> +
> +        required:
> +          - port@0
> +          - port@1
> +
> +    required:
> +      - compatible
> +      - tv-vcc-supply
> +      - ports
> +
> +    dependencies:
> +      nvmem-cells: [ nvmem-cell-names ]
> +      nvmem-cell-names: [ nvmem-cells ]
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +
> +allOf:
> +  - if:
> +      properties:
> +        tv-encoder:
> +          anyOf:
> +            - required: [ interrupts ]
> +            - required: [ interrupts-extended ]
> +      required:
> +        - tv-encoder
> +    then:
> +      required:
> +        - interrupts
> +        - interrupt-controller
> +        - '#interrupt-cells'
> +
> +dependencies:
> +  interrupt-controller: [ '#interrupt-cells', interrupts ]
> +  '#interrupt-cells': [ interrupt-controller ]
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/mfd/x-powers,ac200.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        mixed-signal@10 {
> +            compatible = "x-powers,ac200";
> +            reg = <0x10>;
> +            clocks = <&pwm 5>;
> +            interrupt-parent = <&pio>;
> +            interrupts = <1 20 IRQ_TYPE_LEVEL_LOW>;
> +            interrupt-controller;
> +            #interrupt-cells = <1>;
> +
> +            codec {
> +                compatible = "x-powers,ac200-codec";
> +                #sound-dai-cells = <0>;
> +                ac-ldoin-supply = <&reg_aldo2>;
> +            };
> +
> +            tv-encoder {
> +                compatible = "x-powers,ac200-tve";
> +                interrupts = <AC200_IRQ_TVE>;
> +                tv-vcc-supply = <&reg_aldo2>;
> +
> +                ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    port@0 {
> +                        reg = <0>;
> +
> +                        tve_in: endpoint {
> +                            remote-endpoint = <&tcon_out_tve>;
> +                        };
> +                    };
> +
> +                    port@1 {
> +                        reg = <1>;
> +
> +                        tve_out: endpoint {
> +                            remote-endpoint = <&composite_in>;
> +                        };
> +                    };
> +                };
> +            };
> +        };
> +    };
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        mixed-signal@10 {
> +            compatible = "x-powers,ac200";
> +            reg = <0x10>;
> +            clocks = <&pwm 5>;
> +            /* INTB is not connected. */
> +
> +            tv-encoder {
> +                compatible = "x-powers,ac200-tve";
> +                tv-vcc-supply = <&reg_aldo2>;
> +
> +                ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    port@0 {
> +                        reg = <0>;
> +
> +                        endpoint {
> +                            remote-endpoint = <&tcon_out_tve>;
> +                        };
> +                    };
> +
> +                    port@1 {
> +                        reg = <1>;
> +
> +                        endpoint {
> +                            remote-endpoint = <&composite_in>;
> +                        };
> +                    };
> +                };
> +            };
> +        };
> +    };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3a19da74d00c..1b1dd57cc419 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -29504,6 +29504,14 @@ F:	drivers/net/wwan/
>  F:	include/linux/wwan.h
>  F:	include/uapi/linux/wwan.h
>  
> +X-POWERS AC200 DRIVERS
> +M:	Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
> +M:	James Hilliard <james.hilliard1@xxxxxxxxx>
> +L:	linux-sunxi@xxxxxxxxxxxxxxx
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/mfd/x-powers,ac200.yaml
> +F:	include/dt-bindings/mfd/x-powers,ac200.h
> +
>  X-POWERS AXP288 PMIC DRIVERS
>  M:	Hans de Goede <hansg@xxxxxxxxxx>
>  S:	Maintained
> diff --git a/include/dt-bindings/mfd/x-powers,ac200.h b/include/dt-bindings/mfd/x-powers,ac200.h
> new file mode 100644
> index 000000000000..cc59e2ab4912
> --- /dev/null
> +++ b/include/dt-bindings/mfd/x-powers,ac200.h
> @@ -0,0 +1,13 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * Interrupt numbers of the X-Powers AC200 interrupt controller.
> + */
> +
> +#ifndef _DT_BINDINGS_MFD_X_POWERS_AC200_H
> +#define _DT_BINDINGS_MFD_X_POWERS_AC200_H
> +
> +#define AC200_IRQ_TVE			0
> +#define AC200_IRQ_EPHY			1
> +#define AC200_IRQ_RTC			2
> +
> +#endif /* _DT_BINDINGS_MFD_X_POWERS_AC200_H */
> 
> -- 
> 2.53.0
>

Attachment: signature.asc
Description: PGP signature