[PATCH] ARM: dts: aspeed: anacapa: add NCT7363 fan controllers

[Carl Lee]

Add two NCT7363 fan-controller nodes on Anacapa I2C mux
channels and define their PWM/tach channel mappings.

This matches the fan-control hardware layout and allows the
kernel to probe the correct fan-controller devices.

Signed-off-by: Carl Lee <carl.lee@xxxxxxx>
---
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     | 86 ++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index 1fddf3a5d138..281e226fa2d0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -475,6 +475,45 @@ adc@1f {
 				ti,mode = /bits/ 8 <1>;
 			};
 
+			fanctl1: fan-controller@21 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x21>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl1 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-10 {
+					pwms = <&fanctl1 0 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-15 {
+					pwms = <&fanctl1 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-0 {
+					pwms = <&fanctl1 6 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-2 {
+					pwms = <&fanctl1 9 40000>;
+					tach-ch = /bits/ 8 <0x02>;
+				};
+				fan-3 {
+					pwms = <&fanctl1 9 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+				fan-5 {
+					pwms = <&fanctl1 12 40000>;
+					tach-ch = /bits/ 8 <0x05>;
+				};
+				fan-6 {
+					pwms = <&fanctl1 12 40000>;
+					tach-ch = /bits/ 8 <0x06>;
+				};
+			};
+
 			gpio@22 {
 				compatible = "nxp,pca9555";
 				reg = <0x22>;
@@ -549,6 +588,53 @@ gpio@22 {
 					"LPDB_PWRGD_P50V_HSC5_SYS_R","";
 			};
 
+			fanctl0: fan-controller@23 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x23>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl0 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-10 {
+					pwms = <&fanctl0 0 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-12 {
+					pwms = <&fanctl0 3 40000>;
+					tach-ch = /bits/ 8 <0x0c>;
+				};
+				fan-13 {
+					pwms = <&fanctl0 3 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl0 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-0 {
+					pwms = <&fanctl0 6 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-2 {
+					pwms = <&fanctl0 9 40000>;
+					tach-ch = /bits/ 8 <0x02>;
+				};
+				fan-3 {
+					pwms = <&fanctl0 9 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+				fan-5 {
+					pwms = <&fanctl0 12 40000>;
+					tach-ch = /bits/ 8 <0x05>;
+				};
+				fan-6 {
+					pwms = <&fanctl0 12 40000>;
+					tach-ch = /bits/ 8 <0x06>;
+				};
+			};
+
 			gpio@24 {
 				compatible = "nxp,pca9555";
 				reg = <0x24>;

---
base-commit: 32b6ef9a5d0eca44f9cd91f52f4faa89f145a0de
change-id: 20260909-arm-dts-aspeed-anacapa-add-nct7363-fan-controllers-0df635ebce64

Best regards,
-- 
Carl Lee <carl.lee@xxxxxxx>