[PATCH] usb: typec: ucsi_ccg: Add retry mechanism in ccg_read

[Wayne Chang]

CCG4 firmware occasionally fails to respond to I2C read requests,
especially when reading cci and intr_reg from the ISR path. In these
cases, i2c_transfer() returns -EREMOTEIO.

The CCG4 is EOL, and Infineon no longer supports firmware updates, so
a software workaround is necessary.

Retry the read operation up to three times (four attempts total)
when -EREMOTEIO is returned, with a 1-2 ms sleep between retries.
This allows recovery from transient I2C failures without affecting
other error paths.

The sleep is safe because ccg_read() is called both from process
context and from ccg_irq_handler(), which runs in threaded IRQ
context (registered via request_threaded_irq() with a NULL hard-IRQ
handler), so sleeping is allowed in both cases.

Fixes: 247c554a14aa ("usb: typec: ucsi: add support for Cypress CCGx")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Wayne Chang <waynec@xxxxxxxxxx>
---
 drivers/usb/typec/ucsi/ucsi_ccg.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 91c2958a708c..da8beb14d84c 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -135,6 +135,8 @@ struct version_format {
 #define NVIDIA_FTB_DP_OFFSET	(2)
 #define NVIDIA_FTB_DBG_OFFSET	(3)
 
+#define CCG_READ_MAX_RETRIES	3
+
 struct version_info {
 	struct version_format base;
 	struct version_format app;
@@ -255,6 +257,7 @@ static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
 	};
 	u32 rlen, rem_len = len, max_read_len = len;
 	int status;
+	int retry_count;
 
 	/* check any max_read_len limitation on i2c adapter */
 	if (quirks && quirks->max_read_len)
@@ -266,7 +269,17 @@ static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
 		rlen = min_t(u16, rem_len, max_read_len);
 		msgs[1].len = rlen;
 		put_unaligned_le16(rab, buf);
-		status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+
+		for (retry_count = 0; retry_count <= CCG_READ_MAX_RETRIES; retry_count++) {
+			status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+
+			/* Only retry on -EREMOTEIO, and not after the last attempt */
+			if (status != -EREMOTEIO || retry_count == CCG_READ_MAX_RETRIES)
+				break;
+
+			usleep_range(1000, 2000);
+		}
+
 		if (status < 0) {
 			dev_err(uc->dev, "i2c_transfer failed %d\n", status);
 			pm_runtime_put_sync(uc->dev);

base-commit: 940de590b839f71d6dc846160534bf202401b8b7
-- 
2.25.1