Re: [RESEND PATCH] sh: ecovec24: use static device properties to describe the touchscreen

[Dmitry Torokhov]

On Mon, Jul 13, 2026 at 02:41:31PM -0700, Dmitry Torokhov wrote:
> Convert the board to use static device properties instead of platform
> data to describe the touchscreen, so that support for platform data can
> be removed from tsc2007 driver (ecovec24 is the last board using this
> mechanism of describing tsc2007).
> 
> Device properties do not allow custom board methods, so the method for
> getting "pen down" state was removed (the driver is capable of working
> without it). If this functionality is needed proper pin control/gpio
> support needs to be implemented so that the same pin can serve as an
> input GPIO and an interrupt.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
> 
> This is a resend of the patch I sent in August of 2024. My fault of not
> noticing reply from Adrian inquiring about potential negative impact
> from not having GPIO-based "pen down" detection. I believe this is fine,
> the "pen down" is an optional feature and the driver can detect the
> touches even when it is not specified. Additionally, this is an
> evaluation board, so user impact should be negligible.
> 
> However the bigger question is whether ecovec24 board still relevant.
> According to my research it has the following regressions currently
> unfixed:
> 
> 5716fb9bd9c6 ("mmc: spi: Convert to use GPIO descriptors")
>   - MMC SPI device naming broken (broke SD fallback mode)
> 
> 9fda6693335c ("spi: sh-msiof: Convert to use GPIO descriptors")
>   - SPI CS polarity inverted (broke initialization on the MSIOF0 SPI bus)
> 
> c2f9b05fd5c1 ("media: arch: sh: ecovec: Use new renesas-ceu camera driver")
>   - Camera array sentinel missing (causes out-of-bounds reads and
>     potentially kernel panics)
>   - Camera standby polarity inverted (enadvertently keeps cameras
>     permanently powered off)
>   - Camera disabled iby default (board defconfig points to a deleted
>     driver)
> 
> They are ~6 years old, so I wonder: do people actually *actively* use
> this board with modern kernels? Should it simply be removed?

John, gentle ping...

> 
> Thanks!
> 
>  arch/sh/boards/mach-ecovec24/setup.c | 38 ++++++++--------------------
>  1 file changed, 11 insertions(+), 27 deletions(-)
> 
> diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
> index a641e26f8fdf..110a77f903b5 100644
> --- a/arch/sh/boards/mach-ecovec24/setup.c
> +++ b/arch/sh/boards/mach-ecovec24/setup.c
> @@ -26,6 +26,7 @@
>  #include <linux/platform_data/tmio.h>
>  #include <linux/platform_data/tsc2007.h>
>  #include <linux/platform_device.h>
> +#include <linux/property.h>
>  #include <linux/regulator/fixed.h>
>  #include <linux/regulator/machine.h>
>  #include <linux/sh_eth.h>
> @@ -589,39 +590,21 @@ static struct platform_device keysc_device = {
>  /* TouchScreen */
>  #define IRQ0 evt2irq(0x600)
>  
> -static int ts_get_pendown_state(struct device *dev)
> -{
> -	int val = 0;
> -	gpio_free(GPIO_FN_INTC_IRQ0);
> -	gpio_request(GPIO_PTZ0, NULL);
> -	gpio_direction_input(GPIO_PTZ0);
> -
> -	val = gpio_get_value(GPIO_PTZ0);
> -
> -	gpio_free(GPIO_PTZ0);
> -	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
> -
> -	return val ? 0 : 1;
> -}
> -
> -static int ts_init(void)
> -{
> -	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
> -	return 0;
> -}
> +static const struct property_entry tsc2007_properties[] = {
> +	PROPERTY_ENTRY_U32("ti,x-plate-ohms", 180),
> +	{ }
> +};
>  
> -static struct tsc2007_platform_data tsc2007_info = {
> -	.model			= 2007,
> -	.x_plate_ohms		= 180,
> -	.get_pendown_state	= ts_get_pendown_state,
> -	.init_platform_hw	= ts_init,
> +static const struct software_node tsc2007_swnode = {
> +	.name = "tsc2007",
> +	.properties = tsc2007_properties,
>  };
>  
>  static struct i2c_board_info ts_i2c_clients = {
>  	I2C_BOARD_INFO("tsc2007", 0x48),
>  	.type		= "tsc2007",
> -	.platform_data	= &tsc2007_info,
>  	.irq		= IRQ0,
> +	.swnode		= &tsc2007_swnode,
>  };
>  
>  static struct regulator_consumer_supply cn12_power_consumers[] =
> @@ -1242,8 +1225,9 @@ static int __init arch_setup(void)
>  		gpio_direction_output(GPIO_PTF4, 1);
>  
>  		/* enable TouchScreen */
> -		i2c_register_board_info(0, &ts_i2c_clients, 1);
> +		gpio_request(GPIO_FN_INTC_IRQ0, NULL);
>  		irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
> +		i2c_register_board_info(0, &ts_i2c_clients, 1);
>  	}
>  
>  	/* enable CEU0 */
> -- 
> 2.55.0.795.g602f6c329a-goog
> 
> 

-- 
Dmitry