Re: [PATCH v2] arm64: dts: ti: k3-am69-aquila: Add Toradex DSI to LVDS adapter with the 10.1" V2 display

[Kumar, Udit]

Thanks Leonardo  for v2

On 9/9/2026 11:42 PM, Leonardo Costa wrote:
> From: Leonardo Costa <leonardo.costa@xxxxxxxxxxx>
> 
> Add a device tree overlay for the Toradex DSI to LVDS Adapter with the
> Toradex Capacitive Touch Display 10.1" LVDS V2. The adapter connects to the
> Aquila DSI_1 interface. It is based on the Texas Instruments SN65DSI84
> DSI-to-LVDS bridge and drives an Opto Logic SCX1001511GGC49 10.1" WXGA TFT
> LCD LVDS panel. Touch input is provided by an ILITEK ILI251x capacitive
> touch controller.
> 
> Link: https://developer.toradex.com/hardware/accessories/add-ons/dsi-lvds-adapter
> Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
> Signed-off-by: Leonardo Costa <leonardo.costa@xxxxxxxxxxx>
> ---
> Changes in v2:
> - Add comment explaining the panel timings difference between this
>   overlay and the ones for the native LVDS interface (without the DSI to
>   LVDS bridge).
> - Add information in the hardware pin comments about which signals in
>   the DSI to LVDS bridge each pin connects to.
> - Add comment explaining why the rising edge is used on the TOUCH_INT#
>   signal.
> - Link to v1: https://lore.kernel.org/all/20260803173705.2268792-1-leoreis.costa@xxxxxxxxx/T/#
> ---

Acked-by: Udit Kumar <u-kumar1@xxxxxx>

>[..]