Re: [PATCH v3 net-next] net: phy: air_en8811h: select LED GPIO pins based on AN8811HB package variant

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (main)
by Paolo Abeni <pabeni@xxxxxxxxxx>:

On Mon, 7 Sep 2026 09:56:37 +0800 you wrote:
> The AN8811HB comes in two package variants, AN8811HBCN and AN8811HBN,
> which use different GPIO pins to drive LED outputs. AN8811HBCN uses
> GPIOs 0, 1, and 15, while AN8811HBN uses GPIOs 3, 4, and 5. Using a
> fixed GPIO assignment causes incorrect LED behavior on one of the
> variants.
> 
> Read the package variant from the read-only silicon identification bits
> in AN8811HB_HWTRAP2 at probe time and store it in priv->is_an8811hbcn.
> Add an8811hb_led_gpio_setup() to configure the correct GPIO output pins
> and select lines based on the detected variant, and call it from
> config_init.
> 
> [...]

Here is the summary with links:
  - [v3,net-next] net: phy: air_en8811h: select LED GPIO pins based on AN8811HB package variant
    https://git.kernel.org/netdev/net-next/c/10ca508878b6

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html