[PATCH 20/34] arm64: dts: qcom: qcs6490-vicharak-axon-mini: Move PCIe phy and GPIOs to root port node

[Krishna Chaitanya Chundru]

The perst/wake GPIO properties are per root port and belong in the
root port node, not in the RC controller node. Move perst-gpios/
wake-gpios from the &pcie0/&pcie1 controller overrides to the
respective &pcie0_port/&pcie1_port0 nodes, renaming perst-gpios to
reset-gpios to match the binding used in the root port context.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcs6490-vicharak-axon-mini.dts | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-vicharak-axon-mini.dts b/arch/arm64/boot/dts/qcom/qcs6490-vicharak-axon-mini.dts
index 141d263e6566..89fb685c53cc 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-vicharak-axon-mini.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-vicharak-axon-mini.dts
@@ -652,15 +652,17 @@ &ice {
 };
 
 &pcie0 {
-	perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_clkreq_n>, <&pcie0_reset_n>, <&pcie0_wake_n>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
+&pcie0_port {
+	reset-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l10c_0p88>;
 	vdda-pll-supply = <&vreg_l6b_1p2>;
@@ -669,9 +671,6 @@ &pcie0_phy {
 };
 
 &pcie1 {
-	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>;
 	pinctrl-names = "default";
 
@@ -685,6 +684,11 @@ &pcie1_phy {
 	status = "okay";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+};
+
 &pm7250b_adc {
 	channel@4d {
 		reg = <ADC5_AMUX_THM1_100K_PU>;

-- 
2.34.1