[PATCH 30/34] arm64: dts: qcom: talos: Move PCIe phy and GPIOs to root port node

[Krishna Chaitanya Chundru]

The PCIe phy reference and the perst/wake GPIO properties are
per root port and belong in the root port node (pcie@0), not in the
RC controller node. Move phys from the controller to pcie_port0, and
move perst-gpios/wake-gpios from the &pcie controller overrides to the
&pcie_port0 node in the board files, renaming perst-gpios to reset-gpios
to match the binding used in the root port context.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcs615-ride.dts    | 8 +++++---
 arch/arm64/boot/dts/qcom/talos-evk-som.dtsi | 8 +++++---
 arch/arm64/boot/dts/qcom/talos.dtsi         | 8 ++++----
 3 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index 43f110ba3a7c..4edd2b1bb03a 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -444,15 +444,17 @@ &mdss_dsi0_phy {
 };
 
 &pcie {
-	perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie_default_state>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
+&pcie_port0 {
+	reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+};
+
 &pcie_phy {
 	vdda-phy-supply = <&vreg_l5a>;
 	vdda-pll-supply = <&vreg_l12a>;
diff --git a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
index 198f656bddf1..715bbf29ac68 100644
--- a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
@@ -366,15 +366,17 @@ &mdss_dsi0_phy {
 };
 
 &pcie {
-	perst-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie_default_state>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
+&pcie_port0 {
+	reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+};
+
 &pcie_phy {
 	vdda-phy-supply = <&vreg_l5a>;
 	vdda-pll-supply = <&vreg_l12a>;
diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
index eedfdce3c479..a22f78f5a5de 100644
--- a/arch/arm64/boot/dts/qcom/talos.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos.dtsi
@@ -1367,9 +1367,6 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie_phy>;
-			phy-names = "pciephy";
-
 			max-link-speed = <2>;
 
 			operating-points-v2 = <&pcie_opp_table>;
@@ -1397,10 +1394,13 @@ opp-5000000 {
 			pcie_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				phys = <&pcie_phy>;
+
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
-				bus-range = <0x01 0xff>;
 			};
 		};
 

-- 
2.34.1