[PATCH 33/34] arm64: dts: qcom: lemans: Move PCIe phy and GPIOs to root port node

[Krishna Chaitanya Chundru]

The PCIe phy reference and the perst/wake GPIO properties are
per root port and belong in the root port node (pcie@0), not in the
RC controller node. Move phys from the controller to pcieport0 and
pcieport1. Add the missing pcieport1 label to the pcie1 root port
node to allow board-level overrides. Move perst-gpios/wake-gpios from
the &pcie0/&pcie1 controller overrides to the respective &pcieport0/
&pcieport1 nodes in the board files, renaming perst-gpios to reset-gpios
to match the binding used in the root port context.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/lemans-evk.dts          | 13 +++++++------
 arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi | 13 +++++++------
 arch/arm64/boot/dts/qcom/lemans.dtsi             | 12 +++++-------
 3 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index 194e114a12a0..6946d83cccd1 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -839,9 +839,6 @@ &mdss0_dp1_phy {
 };
 
 &pcie0 {
-	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 
@@ -856,15 +853,17 @@ &pcie0_phy {
 };
 
 &pcie1 {
-	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie1_default_state>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1_phy {
 	vdda-phy-supply = <&vreg_l5a>;
 	vdda-pll-supply = <&vreg_l1c>;
@@ -873,6 +872,8 @@ &pcie1_phy {
 };
 
 &pcieport0 {
+	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
 	port {
 		pcieport0_ep: endpoint {
 			remote-endpoint = <&m2_e_pcie_ep>;
diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
index 3ecf3d464dd7..a27bab7aba22 100644
--- a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
@@ -961,9 +961,6 @@ wake-pins {
 };
 
 &pcie0 {
-	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_default_state>;
 
@@ -971,15 +968,17 @@ &pcie0 {
 };
 
 &pcie1 {
-	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_default_state>;
 
 	status = "okay";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l5a>;
 	vdda-pll-supply = <&vreg_l1c>;
@@ -995,6 +994,8 @@ &pcie1_phy {
 };
 
 &pcieport0 {
+	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
 	wifi@0 {
 		compatible = "pci17cb,1101";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 695eae1b7256..7ae08f29d974 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -2753,9 +2753,6 @@ pcie0: pcie@1c00000 {
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie0_phy>;
-			phy-names = "pciephy";
-
 			eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
 			eq-presets-16gts = /bits/ 8 <0x55 0x55>;
 
@@ -2767,6 +2764,8 @@ pcieport0: pcie@0 {
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
 
+				phys = <&pcie0_phy>;
+
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
@@ -2927,19 +2926,18 @@ pcie1: pcie@1c10000 {
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
-			phys = <&pcie1_phy>;
-			phy-names = "pciephy";
-
 			eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>;
 			eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
 
 			status = "disabled";
 
-			pcie@0 {
+			pcie1_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
 
+				phys = <&pcie1_phy>;
+
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;

-- 
2.34.1