Re: [PATCH v4 01/15] arm64: dts: ti: k3-am62a: Fix MMC0_CLK register address

[Kumar, Udit]

On 9/10/2026 3:17 AM, Judith Mendez wrote:
> MMC0_CLKLB and MMC0_CLK have incorrectly swapped register addresses
> as per datasheet [0]. Set the correct MMC0_CLK address and drop the
> unneeded MMC0_CLKLB pin configuration.
> 
> [0] https://www.ti.com/lit/gpn/am62a7 Rev. E: Table 5-1. Pin Attributes
> 
> Fixes: e041ec6e86e7 ("arm64: dts: ti: k3-am62a7-sk: Enable eMMC support")
> Cc: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Judith Mendez <jm@xxxxxx>
> Reviewed-by: Moteen Shah <m-shah@xxxxxx>
> ---
>  arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> index d3b3675e7a8fc..b04636cab71c7 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> @@ -328,8 +328,7 @@ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
>  	main_mmc0_pins_default: main-mmc0-default-pins {
>  		pinctrl-single,pins = <
>  			AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
> -			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */
> -			AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
> +			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */

Shouldn't be MMC0_CLK be o/p, instead of  PIN_INPUT
Similar to patch [0]
[0] https://lore.kernel.org/all/20260909214743.899477-4-jm@xxxxxx/



>  			AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
>  			AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
>  			AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */