[PATCH RFC 01/10] dt-bindings: backlight: add Kinetic KTD3136

[YİĞİTCAN KAVAKLI via B4 Relay]

From: YİĞİTCAN KAVAKLI <kavakliyigitcan@xxxxxxxxx>

Add devicetree binding documentation for the Kinetic Technologies
KTD3136 3-channel LED backlight driver using the official "kinetic"
vendor prefix.

The device is controlled over I2C and supports an optional hardware
enable GPIO line (enable-gpios), supply regulators, and standard
backlight brightness range properties.

Signed-off-by: YİĞİTCAN KAVAKLI <kavakliyigitcan@xxxxxxxxx>
---
 .../bindings/leds/backlight/kinetic,ktd3136.yaml   | 65 ++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd3136.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd3136.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..f85381c29964529a09989a1ff60d9c9fe4897bb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd3136.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd3136.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD3136 3-Channel LED Backlight Driver
+
+maintainers:
+  - Lee Jones <lee@xxxxxxxxxx>
+
+description: |
+  The Kinetic Technologies KTD3136 is a high efficiency, 3-channel LED
+  backlight driver with 11-bit exponential or linear dimming control
+  via I2C interface.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktd3136
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO connected to the HWEN (Chip Enable) pin.
+    maxItems: 1
+
+  vin-supply:
+    description: Regulator providing power to the VIN pin.
+
+  default-brightness:
+    minimum: 0
+    maximum: 2047
+    default: 2047
+
+  max-brightness:
+    minimum: 0
+    maximum: 2047
+    default: 2047
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@36 {
+            compatible = "kinetic,ktd3136";
+            reg = <0x36>;
+            enable-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+            default-brightness = <2047>;
+            max-brightness = <2047>;
+        };
+    };

-- 
2.47.3