[PATCH 16/17] phy: qcom: edp: Introduce Nord phy_ver_ops and phy_cfg descriptor

[Nabige Aala]

From: Ritesh Kumar <ritesh.kumar@xxxxxxxxxxxxxxxx>

Add qcom_edp_phy_ops_nord wiring all eight Nord-specific callbacks and
nord_edp_phy_cfg collecting the Nord AUX, VCO divider, swing/pre-emphasis
tables and ver_ops, with phy_status_reg overridden to DP_PHY_STATUS_NORD
(0x0110) and bias1_en_2lane set to 0x03 for correct 2-lane operation.

Signed-off-by: Ritesh Kumar <ritesh.kumar@xxxxxxxxxxxxxxxx>
Signed-off-by: Nabige Aala <nabige.aala@xxxxxxxxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 361f4e467351..338f28cb404f 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -1847,6 +1847,29 @@ static int qcom_edp_phy_tx_res_cfg_nord(const struct qcom_edp *edp)
 }
 
 
+static const struct phy_ver_ops qcom_edp_phy_ops_nord = {
+	.com_power_on		= qcom_edp_phy_power_on_nord,
+	.com_resetsm_cntrl	= qcom_edp_phy_com_resetsm_cntrl_nord,
+	.com_bias_en_clkbuflr	= qcom_edp_com_bias_en_clkbuflr_nord,
+	.com_configure_pll	= qcom_edp_com_configure_pll_nord,
+	.com_configure_ssc	= qcom_edp_com_configure_ssc_nord,
+	.com_ldo_config		= qcom_edp_ldo_config_nord,
+	.phy_tx_lane_cfg	= qcom_edp_phy_tx_lane_cfg_nord,
+	.phy_tx_res_cfg		= qcom_edp_phy_tx_res_cfg_nord,
+};
+
+static const struct qcom_edp_phy_cfg nord_edp_phy_cfg = {
+	.is_edp			= false,
+	.aux_cfg		= edp_phy_aux_cfg_nord,
+	.vco_div_cfg		= edp_phy_vco_div_cfg_nord,
+	.dp_swing_pre_emph_cfg	= &nord_dp_swing_pre_emph_cfg,
+	.edp_swing_pre_emph_cfg	= &nord_edp_swing_pre_emph_cfg,
+	.ver_ops		= &qcom_edp_phy_ops_nord,
+	.phy_status_reg		= DP_PHY_STATUS_NORD,
+	.bias1_en_2lane		= 0x03,
+};
+
+
 static const struct of_device_id qcom_edp_phy_match_table[] = {
 	{ .compatible = "qcom,glymur-dp-phy", .data = &glymur_phy_cfg, },
 	{ .compatible = "qcom,sa8775p-edp-phy", .data = &sa8775p_dp_phy_cfg, },

-- 
2.34.1