[PATCH] media: dt-bindings: Use consistent indentation in the example
From: Krzysztof Kozlowski
Date: Sun Sep 13 2026 - 08:36:55 EST
Correct indentation in the examples to consistent 2- or 4-spaces
indentation to fix dt-check-style warnings ("example 0
[indent-consistent] indent mismatch ..."). Preferred is 4-spaces, but
re-indenting entire example just for that is too much churn.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
---
.../bindings/media/arm,mali-c55.yaml | 2 +-
.../devicetree/bindings/media/atmel,isc.yaml | 14 ++---
.../bindings/media/brcm,bcm2835-unicam.yaml | 10 ++--
.../bindings/media/cdns,csi2rx.yaml | 58 +++++++++----------
.../bindings/media/i2c/ovti,ov2680.yaml | 26 ++++-----
.../bindings/media/i2c/ovti,ov2732.yaml | 6 +-
.../bindings/media/img,e5010-jpeg-enc.yaml | 22 +++----
.../bindings/media/microchip,csi2dc.yaml | 52 ++++++++---------
.../bindings/media/microchip,xisc.yaml | 14 ++---
.../bindings/media/qcom,x1e80100-camss.yaml | 26 ++++-----
.../bindings/media/raspberrypi,pispbe.yaml | 10 ++--
.../bindings/media/samsung,fimc.yaml | 14 ++---
.../bindings/media/st,stm32-dcmi.yaml | 16 ++---
.../bindings/media/st,stm32-dcmipp.yaml | 14 ++---
.../devicetree/bindings/media/ti,cal.yaml | 48 +++++++--------
15 files changed, 166 insertions(+), 166 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/arm,mali-c55.yaml b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml
index fc4fcd19922a..39af7ffc70b4 100644
--- a/Documentation/devicetree/bindings/media/arm,mali-c55.yaml
+++ b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml
@@ -79,7 +79,7 @@ examples:
port {
isp_in: endpoint {
- remote-endpoint = <&csi2_rx_out>;
+ remote-endpoint = <&csi2_rx_out>;
};
};
};
diff --git a/Documentation/devicetree/bindings/media/atmel,isc.yaml b/Documentation/devicetree/bindings/media/atmel,isc.yaml
index dc8aba698d78..5c84f372e81a 100644
--- a/Documentation/devicetree/bindings/media/atmel,isc.yaml
+++ b/Documentation/devicetree/bindings/media/atmel,isc.yaml
@@ -102,12 +102,12 @@ examples:
clock-output-names = "isc-mck";
port {
- isc_0: endpoint {
- remote-endpoint = <&ov7740_0>;
- hsync-active = <1>;
- vsync-active = <0>;
- pclk-sample = <1>;
- bus-width = <8>;
- };
+ isc_0: endpoint {
+ remote-endpoint = <&ov7740_0>;
+ hsync-active = <1>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ bus-width = <8>;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
index 5fb5d60f069a..bfec4daccd0a 100644
--- a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
+++ b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
@@ -117,11 +117,11 @@ examples:
power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
brcm,num-data-lanes = <2>;
port {
- csi1_ep: endpoint {
- remote-endpoint = <&imx219_0>;
- bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
- data-lanes = <1 2>;
- };
+ csi1_ep: endpoint {
+ remote-endpoint = <&imx219_0>;
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ data-lanes = <1 2>;
+ };
};
};
...
diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
index 6ed9a5621064..cbc6249e8803 100644
--- a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
+++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
@@ -160,50 +160,50 @@ examples:
phy-names = "dphy";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@0 {
+ reg = <0>;
- csi2rx_in_sensor: endpoint {
- remote-endpoint = <&sensor_out_csi2rx>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
+ csi2rx_in_sensor: endpoint {
+ remote-endpoint = <&sensor_out_csi2rx>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
};
+ };
- port@1 {
- reg = <1>;
+ port@1 {
+ reg = <1>;
- csi2rx_out_grabber0: endpoint {
- remote-endpoint = <&grabber0_in_csi2rx>;
- };
+ csi2rx_out_grabber0: endpoint {
+ remote-endpoint = <&grabber0_in_csi2rx>;
};
+ };
- port@2 {
- reg = <2>;
+ port@2 {
+ reg = <2>;
- csi2rx_out_grabber1: endpoint {
- remote-endpoint = <&grabber1_in_csi2rx>;
- };
+ csi2rx_out_grabber1: endpoint {
+ remote-endpoint = <&grabber1_in_csi2rx>;
};
+ };
- port@3 {
- reg = <3>;
+ port@3 {
+ reg = <3>;
- csi2rx_out_grabber2: endpoint {
- remote-endpoint = <&grabber2_in_csi2rx>;
- };
+ csi2rx_out_grabber2: endpoint {
+ remote-endpoint = <&grabber2_in_csi2rx>;
};
+ };
- port@4 {
- reg = <4>;
+ port@4 {
+ reg = <4>;
- csi2rx_out_grabber3: endpoint {
- remote-endpoint = <&grabber3_in_csi2rx>;
- };
+ csi2rx_out_grabber3: endpoint {
+ remote-endpoint = <&grabber3_in_csi2rx>;
};
+ };
};
};
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
index 634d3b821b8c..83f84a7828bf 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -90,22 +90,22 @@ examples:
#size-cells = <0>;
ov2680: camera-sensor@36 {
- compatible = "ovti,ov2680";
- reg = <0x36>;
- clocks = <&osc>;
- clock-names = "xvclk";
- reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ compatible = "ovti,ov2680";
+ reg = <0x36>;
+ clocks = <&osc>;
+ clock-names = "xvclk";
+ reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
- DOVDD-supply = <&sw2_reg>;
- DVDD-supply = <&sw2_reg>;
- AVDD-supply = <®_peri_3p15v>;
+ DOVDD-supply = <&sw2_reg>;
+ DVDD-supply = <&sw2_reg>;
+ AVDD-supply = <®_peri_3p15v>;
- port {
- ov2680_to_mipi: endpoint {
- remote-endpoint = <&mipi_from_sensor>;
- link-frequencies = /bits/ 64 <330000000>;
- };
+ port {
+ ov2680_to_mipi: endpoint {
+ remote-endpoint = <&mipi_from_sensor>;
+ link-frequencies = /bits/ 64 <330000000>;
};
+ };
};
};
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2732.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2732.yaml
index 814fc568c550..b6b5145802e7 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2732.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2732.yaml
@@ -94,9 +94,9 @@ examples:
port {
camera_out: endpoint {
- data-lanes = <1 2>;
- link-frequencies = /bits/ 64 <360000000>;
- remote-endpoint = <&mipi_in_camera>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <360000000>;
+ remote-endpoint = <&mipi_in_camera>;
};
};
};
diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
index 085020cb9e61..b6f80098beb7 100644
--- a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
+++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
@@ -61,15 +61,15 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
soc {
- #address-cells = <2>;
- #size-cells = <2>;
- jpeg-encoder@fd20000 {
- compatible = "img,e5010-jpeg-enc";
- reg = <0x00 0xfd20000 0x00 0x100>,
- <0x00 0xfd20200 0x00 0x200>;
- reg-names = "core", "mmu";
- clocks = <&k3_clks 201 0>;
- power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- };
+ #address-cells = <2>;
+ #size-cells = <2>;
+ jpeg-encoder@fd20000 {
+ compatible = "img,e5010-jpeg-enc";
+ reg = <0x00 0xfd20000 0x00 0x100>,
+ <0x00 0xfd20200 0x00 0x200>;
+ reg-names = "core", "mmu";
+ clocks = <&k3_clks 201 0>;
+ power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
index b3a345fc6464..d06987680ed8 100644
--- a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
+++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
@@ -149,22 +149,22 @@ examples:
clock-names = "pclk", "scck";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>; /* must be 0, first child port */
- csi2dc_in: endpoint { /* input from IDI interface */
- bus-type = <4>; /* MIPI CSI2 D-PHY */
- remote-endpoint = <&csi2host_out>;
- };
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>; /* must be 0, first child port */
+ csi2dc_in: endpoint { /* input from IDI interface */
+ bus-type = <4>; /* MIPI CSI2 D-PHY */
+ remote-endpoint = <&csi2host_out>;
+ };
+ };
- port@1 {
- reg = <1>; /* must be 1, second child port */
- csi2dc_out: endpoint {
- remote-endpoint = <&xisc_in>; /* output to sensor controller */
- };
- };
+ port@1 {
+ reg = <1>; /* must be 1, second child port */
+ csi2dc_out: endpoint {
+ remote-endpoint = <&xisc_in>; /* output to sensor controller */
+ };
+ };
};
};
@@ -181,18 +181,18 @@ examples:
dma-names = "rx";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>; /* must be 0, first child port */
- csi2dc_input: endpoint { /* input from IDI interface */
- remote-endpoint = <&csi2host_out>;
- };
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>; /* must be 0, first child port */
+ csi2dc_input: endpoint { /* input from IDI interface */
+ remote-endpoint = <&csi2host_out>;
+ };
+ };
- port@1 {
- reg = <1>;
- };
+ port@1 {
+ reg = <1>;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
index 25f5f79d40ce..6a9e56c486c2 100644
--- a/Documentation/devicetree/bindings/media/microchip,xisc.yaml
+++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
@@ -118,12 +118,12 @@ examples:
clock-output-names = "isc-mck";
port {
- xisc_in: endpoint {
- bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
- remote-endpoint = <&csi2dc_out>;
- hsync-active = <1>;
- vsync-active = <1>;
- bus-width = <12>;
- };
+ xisc_in: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+ remote-endpoint = <&csi2dc_out>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ bus-width = <12>;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
index 2d1662ef522b..bdf03a944fd7 100644
--- a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
@@ -289,19 +289,19 @@ examples:
"vfe_lite_cphy_rx",
"vfe_lite_csid";
- interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "csid0",
"csid1",
diff --git a/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml b/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml
index 5c0f2f7b1d95..36fde927382a 100644
--- a/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml
+++ b/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml
@@ -54,10 +54,10 @@ examples:
#size-cells = <2>;
isp@880000 {
- compatible = "brcm,bcm2712-pispbe", "raspberrypi,pispbe";
- reg = <0x10 0x00880000 0x0 0x4000>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&firmware_clocks 7>;
- iommus = <&iommu2>;
+ compatible = "brcm,bcm2712-pispbe", "raspberrypi,pispbe";
+ reg = <0x10 0x00880000 0x0 0x4000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&firmware_clocks 7>;
+ iommus = <&iommu2>;
};
};
diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml
index 1bfba84f8854..1329d4ee0705 100644
--- a/Documentation/devicetree/bindings/media/samsung,fimc.yaml
+++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml
@@ -188,13 +188,13 @@ examples:
/* ... CSIS 1 */
fimc-lite@b90000 {
- compatible = "samsung,exynos4212-fimc-lite";
- reg = <0xb90000 0x1000>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&pd_isp>;
- clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
- clock-names = "flite";
- iommus = <&sysmmu_fimc_lite0>;
+ compatible = "samsung,exynos4212-fimc-lite";
+ reg = <0xb90000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_isp>;
+ clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+ clock-names = "flite";
+ iommus = <&sysmmu_fimc_lite0>;
};
/* ... FIMC-LITE 1 */
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
index 7c2ddd27780f..cb0116176c3f 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -120,14 +120,14 @@ examples:
dma-names = "tx";
port {
- dcmi_0: endpoint {
- remote-endpoint = <&ov5640_0>;
- bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
- bus-width = <8>;
- hsync-active = <0>;
- vsync-active = <0>;
- pclk-sample = <1>;
- };
+ dcmi_0: endpoint {
+ remote-endpoint = <&ov5640_0>;
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
index 162a0c526d5d..0bf7c674dd97 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
@@ -120,13 +120,13 @@ examples:
clocks = <&rcc DCMIPP_K>;
port {
- endpoint {
- remote-endpoint = <&mipid02_2>;
- bus-width = <8>;
- hsync-active = <0>;
- vsync-active = <0>;
- pclk-sample = <0>;
- };
+ endpoint {
+ remote-endpoint = <&mipid02_2>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <0>;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
index f1a940a110d2..c223b4f2d75a 100644
--- a/Documentation/devicetree/bindings/media/ti,cal.yaml
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -136,17 +136,17 @@ examples:
ti,camerrx-control = <&scm_conf 0xE94>;
ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- csi2_0: port@0 {
- reg = <0>;
- csi2_phy0: endpoint {
- remote-endpoint = <&csi2_cam0>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
- };
+ csi2_0: port@0 {
+ reg = <0>;
+ csi2_phy0: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
};
};
@@ -156,21 +156,21 @@ examples:
#size-cells = <0>;
camera-sensor@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
- AVDD-supply = <®_2p8v>;
- DOVDD-supply = <®_1p8v>;
- DVDD-supply = <®_1p5v>;
- clocks = <&clk_ov5640_fixed>;
- clock-names = "xclk";
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ AVDD-supply = <®_2p8v>;
+ DOVDD-supply = <®_1p8v>;
+ DVDD-supply = <®_1p5v>;
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
- port {
- csi2_cam0: endpoint {
- remote-endpoint = <&csi2_phy0>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
- };
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2_phy0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
};
};
--
2.53.0