Re: [PATCH 10/34] arm64: dts: qcom: qcs8550-rb5gen2: Move PCIe phy and GPIOs to root port node

[Konrad Dybcio]

On 9/10/26 3:28 PM, Krishna Chaitanya Chundru wrote:
> The perst/wake GPIO properties are per root port and belong in the
> root port node, not in the RC controller node. Move perst-gpios/
> wake-gpios from the &pcie0/&pcie1 controller overrides to the
> respective &pcie0_port0/&pcie1_port0 nodes, renaming perst-gpios to
> reset-gpios to match the binding used in the root port context.
> 
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
> ---

splitting sm8550-renamed from sm8550 is a bit excessive, but anyway:

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad