Re: [PATCH 24/34] arm64: dts: qcom: sc8180x: Move PCIe phy and GPIOs to root port node

[Konrad Dybcio]

On 9/10/26 3:29 PM, Krishna Chaitanya Chundru wrote:
> The PCIe phy reference and the perst/wake GPIO properties are
> per root port and belong in the root port node (pcie@0), not in the
> RC controller node. Move phys and phy-names from the controller to
> pcie0_port0, pcie1_port0, pcie2_port0, and pcie3_port0, adding
> labels to these nodes to allow board-level overrides. Move
> perst-gpios/wake-gpios from the controller overrides to the
> respective port nodes in the board files, renaming perst-gpios to
> reset-gpios to match the binding used in the root port context.
> 
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad