Re: [PATCH v3 4/4] arm64: dts: renesas: r9a09g047e57-smarc: Enable USB2.0 support
From: Geert Uytterhoeven
Date: Mon Sep 14 2026 - 14:27:57 EST
Hi Tommaso,
On Wed, 9 Sept 2026 at 10:55, Tommaso Merciai
<tommaso.merciai.xr@xxxxxxxxxxxxxx> wrote:
> Enable USB2.0 support on the RZ/G3E EVK board. The USB1B_1A_HOST and
> USB5_4_HOST connectors support host operation only, while USB0_OTG
> supports both host and peripheral operation.
>
> renesas-smarc2.dtsi is shared by all boards based on the RZ SMARC
> Carrier II Board. USB2.0 is not yet supported on the RZ/G3L SMARC
> EVK, so disable the common USB2.0 nodes in its board DTS until proper
> support is added.
>
> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
> +++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
> @@ -298,6 +298,28 @@ sd1-data {
> };
> };
>
> + usb20_pins: usb20 {
> + ovc {
> + pinmux = <RZG3E_PORT_PINMUX(0, 0, 12)>; /* USB20_OVRCURN */
> + bias-pull-up;
> + };
> +
> + vbus {
> + pinmux = <RZG3E_PORT_PINMUX(0, 1, 12)>; /* USB20_VBUSEN */
> + };
> + };
> +
> + usb21_pins: usb21 {
> + ovc {
> + pinmux = <RZG3E_PORT_PINMUX(G, 6, 12)>; /* USB21_OVRCURN */
> + bias-pull-up;
> + };
> +
> + vbus {
> + pinmux = <RZG3E_PORT_PINMUX(K, 3, 12)>; /* USB21_VBUSEN */
> + };
While these two signals are wired to the SLG46108, which generates
USB1_EN_OC# from that, the latter does not seem to be wired on the
carrier board (SMARC_MODULE_CN P67)?
> + };
> +
> usb3_pins: usb3 {
> pinmux = <RZG3E_PORT_PINMUX(4, 1, 12)>, /* USB30_VBUSEN */
> <RZG3E_PORT_PINMUX(4, 0, 12)>; /* USB30_OVRCURN */
The rest LGTM.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds