[PATCH v5 0/3] arm: dts: altera: add Draeger M48 CPU Module

[Petko Manolov]

Adding the device trees for “Dräger M48 on NXP i.MX6 (Q) and Intel/Altera
SoCFPGA Cyclone V” board variant.  It has both (the SoC and FPGA) on the same
carrier and they are cross-monitoring each other.

This is the SoCFPGA devicetree part.

Petko Manolov (3):
  dt-bindings: vendor-prefixes: add Draeger AG
  dt-bindings: arm: altera: add Draeger M48 Module
  arm: dts: altera: add Draeger M48 CPU Module

 .../devicetree/bindings/arm/altera.yaml       |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/intel/socfpga/Makefile      |   1 +
 .../socfpga/socfpga_cyclone5_draeger_m48.dts  | 123 ++++++++++++++++++
 4 files changed, 127 insertions(+)
 create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts

-- 
2.47.3