Re: [PATCH] arm64: dts: ti: k3-am62p-j722s-common-wakeup: Add GP_SW1 efuse node for silicon revision

[Kumar, Udit]

Hi Judith,

On 9/15/2026 5:43 AM, Judith Mendez wrote:
> Add efuse node for GP_SW1 register at offset 0x230. The GP_SW1
> efuse register is used to determine AM62Px silicon revision.
> Reference efuse cell from chipid node via nvmem-cells.
> 
> Signed-off-by: Judith Mendez <jm@xxxxxx>
> ---
>  .../boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi  | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
> index 8612b45e665cf..0f00e9d87f8ba 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
> @@ -19,9 +19,23 @@ wkup_conf: bus@43000000 {
>  		chipid: chipid@14 {
>  			compatible = "ti,am654-chipid";
>  			reg = <0x14 0x4>;
> +			nvmem-cells = <&gpsw1>;
> +			nvmem-cell-names = "gpsw1";
>  			bootph-all;
>  		};
>  
> +		gpsw_efuse: efuse@230 {
> +			compatible = "ti,am62p-efuse", "socionext,uniphier-efuse";
> +			reg = <0x230 0x10>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			bootph-all;
> +
> +			gpsw1: gpsw1@4 {
> +				reg = <0x4 0x4>;
> +			};

For J722S, this register this marked as reserved,
Could you update in am62-p specific dt.

Thanks

> +		};
> +
>  		opp_efuse_table: syscon@18 {
>  			compatible = "ti,am62-opp-efuse-table", "syscon";
>  			reg = <0x18 0x4>;