[PATCH 2/2] arm64: dts: qcom: shikra: Add WCN clock to Bluetooth node

[Yepuri Siddu]

With RPMCC proxy vote removal, the Bluetooth node must explicitly
declare its WCN clock dependency so the hci_qca driver can vote for
it during BT power on/off via the pwrseq path.

CQM SOM uses RPM_SMD_RF_CLK2 while IQS SOM uses RPM_SMD_RF_CLK1,
reflecting the WCN clock assignments on each board variant.

Signed-off-by: Yepuri Siddu <yepuri.siddu@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi | 2 ++
 arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi b/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi
index 8ac42ff625a0..4e03e459c7c1 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi
@@ -220,6 +220,8 @@ bluetooth {
 		vddxo-supply = <&vreg_pmu_xo>;
 		vddrf-supply = <&vreg_pmu_rf>;
 		vddch0-supply = <&vreg_pmu_ch0>;
+
+		clocks = <&rpmcc RPM_SMD_RF_CLK2>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi b/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi
index 4ff97945274d..227283ab74a8 100644
--- a/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi
@@ -242,6 +242,8 @@ bluetooth {
 		vddxo-supply = <&vreg_pmu_xo>;
 		vddrf-supply = <&vreg_pmu_rf>;
 		vddch0-supply = <&vreg_pmu_ch0>;
+
+		clocks = <&rpmcc RPM_SMD_RF_CLK1>;
 	};
 };
 

-- 
2.34.1