Re: (subset) [PATCH v4 00/12] clk: qcom: ipq-cmn-pll: Add IPQ5210 CMN PLL support

[Bjorn Andersson]

On Sun, 06 Sep 2026 07:18:06 -0700, Luo Jie wrote:
> The CMN (Common) PLL block of IPQ5210 is almost same as that of IPQ9574
> which is currently supported by the driver. It accepts a 48 MHz reference
> clock from the on-board Wi-Fi block and is configured to run at 12 GHz.
> The difference is in the output clocks.
> 
> This patch series adds support for IPQ5210 into the CMN PLL clock driver.
> On the IPQ5210, the CMN PLL block supplies a broad set of output clocks
> to the networking hardware and GCC:
> 
> [...]

Applied, thanks!

[01/12] clk: qcom: ipq-cmn-pll: Use devm_clk_hw_register_fixed_rate_parent_data
        commit: 02abccc8cbd496e41197ce49606d7e62e51e74ae
[03/12] clk: qcom: clk-regmap-divider: Support CLK_DIVIDER_* flags
        commit: a6c7b75f0a2841e996173183f03b1f660cdfe01d
[04/12] clk: qcom: ipq-cmn-pll: Register CMN PLL /2 clock
        commit: 2b7bf51437b3ca029bf1ce34c8bd0f6f31364262
[05/12] clk: qcom: ipq-cmn-pll: Add NSS clock support
        commit: 305945963fd7c1baf913b2d9899a3bdc1cbf9d37
[06/12] clk: qcom: ipq-cmn-pll: Add PPE clock support
        commit: 9d9326971cfe983e29050d3f4abdd236307d93cc
[07/12] clk: qcom: ipq-cmn-pll: Add PON reference clock support
        commit: e30664a4cee3096aad71f63e6d5e2b2e67248277
[08/12] clk: qcom: ipq-cmn-pll: Add EPHY-RAW clock support
        commit: c627e9d87bfcfb277082922863d2d139667fdc53
[09/12] clk: qcom: ipq-cmn-pll: Add clock gate support for fixed clocks
        commit: 0de5d615f1b698affec0c6050742c72240cc7fb9
[10/12] clk: qcom: ipq-cmn-pll: Add all output clocks for IPQ5210
        commit: 77bc1b834c53b4209b9ba3ec313caf9796367f9b

Best regards,
-- 
Bjorn Andersson <andersson@xxxxxxxxxx>