Re: [PATCH v2 2/2] arm: dts: nxp: imx: Add devicetree files for M48

[Dinh Nguyen]

Hi Petko,

On 9/24/26 13:38, Petko Manolov wrote:
> M48 is a heterogeneous board made by Draeger that is based on two
> independent cpus, that are monitoring each other.  One of them is
> imx6, the other is Altera SoCFPGA Cyclone 5.  The latter is booting
> independently off qspi.
>
> This one adds the DT for the two variants of M48 that are based on
> imx6q and imx6dl.
>
> Signed-off-by: Petko Manolov <petko.manolov@xxxxxxxxxxxx>
> ---
>   arch/arm/boot/dts/nxp/imx/Makefile            |   2 +
>   .../boot/dts/nxp/imx/imx6dl-draeger-m48.dts   |  23 ++
>   .../boot/dts/nxp/imx/imx6q-draeger-m48.dts    |  23 ++
>   .../boot/dts/nxp/imx/imx6qdl-draeger-m48.dtsi | 369 ++++++++++++++++++
>   .../boot/dts/nxp/imx/imx6qp-draeger-m48.dts   |  78 ++++
>   5 files changed, 495 insertions(+)
>   create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-draeger-m48.dts
>   create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-draeger-m48.dts
>   create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-draeger-m48.dtsi
>   create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qp-draeger-m48.dts
>
> diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
> index 1a2539fa19b4..44b393256235 100644
> --- a/arch/arm/boot/dts/nxp/imx/Makefile
> +++ b/arch/arm/boot/dts/nxp/imx/Makefile
> @@ -220,6 +220,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>   	imx6q-dmo-edmqmx6.dtb \
>   	imx6q-dms-ba16.dtb \
>   	imx6q-ds.dtb \
> +	imx6q-draeger-m48.dtb \
> +	imx6dl-draeger-m48.dtb \
>   	imx6q-emcon-avari.dtb \
Please remember to run get_maintainer on the file that you're 
submitting. For this case, for the arch/arm/boot/dts/nxp, you need to 
also Cc'd :

Frank Li <Frank.Li@xxxxxxx> (maintainer:ARM/FREESCALE IMX / MXC / 
LAYERSCAPE ARM ARCHIT...)
Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> (maintainer:ARM/FREESCALE IMX / 
MXC / LAYERSCAPE ARM ARCHIT...)
Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx> (reviewer:ARM/FREESCALE 
IMX / MXC / LAYERSCAPE ARM ARCHIT...)
Fabio Estevam <festevam@xxxxxxxxx> (reviewer:ARM/FREESCALE IMX / MXC / 
LAYERSCAPE ARM ARCHIT...)

Dinh