Re: [PATCH] ASoC: codecs: lpass-wsa-macro: rewrite the interpolator volume after enabling clocks

[Johan Hovold]

On Thu, Sep 24, 2026 at 08:59:40AM -0400, Liviu Nicoara wrote:
> Commit 902f497a1ff5 ("ASoC: codecs: lpass-wsa-macro: remove useless
> gain read/write sequence") removed the read and write of the digital
> volume register in wsa_macro_enable_interpolator(), on the grounds that
> writing back the value just read does nothing. The comment above it,
> "apply gain after int clk is enabled", was left in place.
> 
> On the Dell XPS 13 9345 (X1E80100, four WSA8845 amplifiers on two WSA
> macros) the write does something: a volume change made while the path
> is idle does not take effect when playback starts. Lowering the digital
> volume from 81 to 63 with nothing playing, then playing a test tone,
> gave about the same level as before the change. With the rewrite
> restored, lowering it from 81 to 69 while idle played audibly quieter,
> and restoring 81 while idle brought the level back. Changes made during
> playback take effect with or without the rewrite.
> 
> This is the behaviour described in commit 46188db080bd ("ASoC: codecs:
> lpass-wsa-macro: fix compander volume hack"): "the volume registers
> still need to be written after enabling clocks in order for any prior
> updates to take effect." The value read comes from the register cache,
> so the write pushes the last requested volume to the hardware once its
> clock runs.
> 
> Restore the rewrite in the interpolator's POST_PMU event only. The mix
> path event removed later in the same series is not brought back.
> 
> Fixes: 902f497a1ff5 ("ASoC: codecs: lpass-wsa-macro: remove useless gain read/write sequence")

Since this fixes a regression that may affect the speaker limits imposed
by the machine driver, please make sure that this gets backported as
well:

Cc: stable@xxxxxxxxxxxxxxx

> Assisted-by: Claude:claude-opus-5-5
> Signed-off-by: Liviu Nicoara <lnicoara@xxxxxxxxxxxx>

Johan