RE: [PATCH net-next v8 01/11] dt-bindings: net: add onsemi's S2500

[Selvamani Rajagopal]

Krzysztof,

Not sure what I did is right. I didn't remove the "Reviewed by" tag though there was a change in the YAML file
Because it was a minor change. Previously it had edge triggered interrupt type. Now it is changed level triggered.

If I have to remove it, let me know. I can do it and generate new version. 

Sincerely
Selva

> -----Original Message-----
> From: Selvamani Rajagopal via B4 Relay
> Subject: [PATCH net-next v8 01/11] dt-bindings: net: add onsemi's S2500
> 
> 
> Add device tree binding for the onsemi S2500 IEEE 802.3cg
> compliant Ethernet transceiver device.
> 
> S2500 has both Media Access Controller (MAC) and 10Base-T1S
> Ethernet PHY. MAC implements 10 Mbps half duplex Ethernet
> MAC. Communication between the host and MAC-PHY is defined in
> OPEN Alliance 10BASE-T1x MACPHY Serial Interface document
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
> Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@xxxxxxxxxx>
> 
> ---
> changes in v8
> - Changed the interrupt type to level triggered
> - Added reset-gpio entry that was recently supported.
> changes in v7
> - Added the missing review tag


> diff --git a/Documentation/devicetree/bindings/net/onnn,s2500.yaml
> b/Documentation/devicetree/bindings/net/onnn,s2500.yaml