Re: [PATCH v9 0/5] Add CAMSS and IMX577 sensor support for Shikra EVK

[Bjorn Andersson]

On Wed, 23 Sep 2026 10:27:27 +0530, Nihal Kumar Gupta wrote:
> Shikra EVK is based on the Qualcomm Shikra SoC.
> It lacks a camera sensor in its default configuration.
> This series adds CAMSS driver support, CCI definitions and enables
> the 22-pin IMX577 sensor via CSIPHY1 through device tree overlays.
> 
> We have tested IMX577 Sensor on CCI1 with following commands:
> - media-ctl --reset
> - media-ctl -d /dev/media0 -V '"imx577 1-001a":0[fmt:SRGGB10/4056x3040 field:none]'
> - media-ctl -d /dev/media0 -V '"msm_csiphy1":0[fmt:SRGGB10/4056x3040]'
> - media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> - media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> - media-ctl -d /dev/media0 -l '"msm_csiphy1":1->"msm_csid0":0[1]'
> - media-ctl -d /dev/media0 -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> - yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0
> 
> [...]

Applied, thanks!

[1/5] arm64: dts: qcom: shikra: Add CAMSS node for Shikra
      commit: f1e325d194fb0d719d848a42ec522e0f70250e44
[2/5] arm64: dts: qcom: shikra: Add CCI definitions for Shikra
      commit: 7a3fcdb8d28fa5f162003b4f28f0160c82ee62af
[3/5] arm64: dts: qcom: shikra: Add mclks pin configuration for Shikra
      commit: e1f5d59e0eca23e2e69353f769bfaa187ad94ab8
[4/5] arm64: dts: qcom: shikra-cqm-cqs-evk-imx577-camera: Add DT overlay for Shikra
      commit: 9cd1efbde98772e08a79a7b5d655cae60b38264e
[5/5] arm64: dts: qcom: shikra-iqs-evk-imx577-camera: Add DT overlay for Shikra
      commit: a4be00ccf9e0bdcfd407397368e0599c559d90be

Best regards,
-- 
Bjorn Andersson <andersson@xxxxxxxxxx>