Re: [PATCH v5 15/15] ARM: dts: qcom: Add initial device tree for Kuno SoC

[Hardeep Sharma]

On 9/1/2026 9:26 PM, Konrad Dybcio wrote:
> On 8/27/26 7:51 PM, Hardeep Sharma wrote:
> > Add SoC-level DTSI (qcom-kuno.dtsi) and IDP board DTS
> > (qcom-kuno-idp.dts) for the Qualcomm Kuno SoC.
> >
> > Peripherals included in this initial set:
> >    - Single Cortex-A7 CPU with PSCI idle states
> >    - RPMh RSC with clock controller, power domains, and BCM voter
> >    - GCC (Global Clock Controller)
> >    - TLMM pin controller (110 GPIOs)
> >    - Interconnect (aggre-noc, cnoc-main)
> >    - GENI UART console (QUP SE3)
> >    - SMEM, hardware spinlocks (TCSR mutex)
> >
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
> > Reviewed-by: Linus Walleij <linusw@xxxxxxxxxx>
> > Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Hardeep Sharma <hardeep.sharma@xxxxxxxxxxxxxxxx>
> > ---
> [...]
>
> > +		pdc: interrupt-controller@b220000 {
> > +			compatible = "qcom,kuno-pdc", "qcom,pdc";
> > +			reg = <0x0b220000 0x10000>;
> > +			qcom,pdc-ranges = <1 148 6>,
> > +					  <9 156 2>,
> > +					  <17 164 7>;
> GPT reports you're missing a whole lot of entries here and that will
> lead to the wakeup GPIOs silently failing.
>
> An old local script suggests this map is correct instead, but please
> check yourself:
>
> <1 148 6>,
> <9 156 2>,
> <17 164 7>,
> <26 173 1>,
> <29 176 1>,
> <40 187 1>,
> <46 193 6>,
> <52 266 32>,
> <84 249 1>,
> <85 256 1>,
> <86 315 4>,
> <90 43 1>,
> <91 45 1>,
> <92 154 2>,
> <94 158 6>,
> <100 171 2>,
> <102 174 1>,
> <103 23 7>,
> <110 147 1>,
> <111 31 4>,
> <115 175 1>,
> <116 177 10>,
> <126 188 5>;
>
> Konrad

Thanks Konrad for review.

fixed in v6 : 
https://lore.kernel.org/all/20260929-kuno-soc-support-v6-1-a16afafbcbc7@xxxxxxxxxxxxxxxx/