[PATCH 2/8] iio: adc: rzt2h: Wait for the analog part to stop after a forced stop

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

When ADCSR.ADST is cleared to forcibly stop a conversion, the analog part
of the A/D converter can take up to 2 ADCLK cycles to stop operating.

Wait for the write to ADCSR to complete and allow the analog part to stop
before reconfiguring or restarting the converter.

Fixes: fc3b97dd71ab ("iio: adc: add RZ/T2H / RZ/N2H ADC driver")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
 drivers/iio/adc/rzt2h_adc.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/iio/adc/rzt2h_adc.c b/drivers/iio/adc/rzt2h_adc.c
index 8ba7b0fde8a1..d53888730f00 100644
--- a/drivers/iio/adc/rzt2h_adc.c
+++ b/drivers/iio/adc/rzt2h_adc.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/kthread.h>
+#include <linux/math.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
@@ -58,6 +59,7 @@
 #define RZT2H_ADC_DMA_BUFFER_SIZE	(RZT2H_ADC_DMA_BUFFER_SAMPLES * \
 					 RZT2H_ADC_MAX_CHANNELS * \
 					 RZT2H_ADC_CHANNEL_BYTES)
+#define RZT2H_ADC_STOP_CYCLES		2
 
 struct rzt2h_adc_dma {
 	struct dma_chan *chan;
@@ -124,6 +126,13 @@ static void rzt2h_adc_stop(struct rzt2h_adc *adc)
 	reg &= ~(RZT2H_ADCSR_ADIE_MASK | RZT2H_ADCSR_ADST_MASK);
 
 	writew(reg, adc->base + RZT2H_ADCSR_REG);
+
+	/*
+	 * When a conversion is forcibly stopped, the analog part of the A/D
+	 * converter takes up to 2 ADCLK cycles to stop operating.
+	 */
+	ndelay(DIV_ROUND_UP_ULL((u64)RZT2H_ADC_STOP_CYCLES * NSEC_PER_SEC,
+				adc->adclk_rate));
 }
 
 static void rzt2h_adc_set_sst(struct rzt2h_adc *adc, unsigned int ch, u8 sst)
-- 
2.55.0