[PATCH v3 12/12] arm64: dts: qcom: smb2370: Enable BCL sensor node
From: Manaf Meethalavalappu Pallikunhi
Date: Tue Sep 29 2026 - 09:18:45 EST
Add Battery Current Limiting (BCL) hardware monitor node for smb2370
PMIC. The BCL monitors battery voltage and current, providing hardware
interrupts when configurable thresholds are violated.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/smb2370.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/smb2370.dtsi b/arch/arm64/boot/dts/qcom/smb2370.dtsi
index 1e02578e4ee3..4809b3d8cfe2 100644
--- a/arch/arm64/boot/dts/qcom/smb2370.dtsi
+++ b/arch/arm64/boot/dts/qcom/smb2370.dtsi
@@ -10,6 +10,17 @@ smb2370_j_e2: pmic@9 {
#address-cells = <1>;
#size-cells = <0>;
+ sensor@4700 {
+ compatible = "qcom,smb2370-bcl";
+ reg = <0x4700>;
+ interrupts = <0x9 0x47 0x0 IRQ_TYPE_EDGE_RISING>,
+ <0x9 0x47 0x1 IRQ_TYPE_EDGE_RISING>,
+ <0x9 0x47 0x2 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "max-min",
+ "critical",
+ "emergency";
+ };
+
smb2370_j_e2_eusb2_repeater: phy@fd00 {
compatible = "qcom,smb2370-eusb2-repeater";
reg = <0xfd00>;
--
2.43.0