[PATCH v8 0/3] arm: dts: altera: add Draeger M48 CPU board

[Petko Manolov]

Adding the device trees for “Dräger M48 on NXP i.MX6 (Q) and Intel/Altera
SoCFPGA Cyclone V” board variant.  It has both (the SoC and FPGA) on the
same carrier and they are cross-monitoring each other.  The SoCFPGA boots
independently off qspi flash.

This is the SoCFPGA devicetree part.

now in v8:

  - modified draeger,m48 to draeger,socfpga-48 because it is more consistent
    with its other imx counterparts imx6q-m48 and imx6dl-m48
  - dropped gpio3 and gpio4 bindings;

new in v7:

  - replaced module with board as this seems to be confusing to some;
  - add Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> tag;

*** BLURB HERE ***

Petko Manolov (3):
  dt-bindings: vendor-prefixes: add Draeger AG
  dt-bindings: arm: altera: add Draeger M48 dual-cpu board
  arm: dts: altera: add Draeger M48 CPU Module

 .../devicetree/bindings/arm/altera.yaml       |  1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 arch/arm/boot/dts/intel/socfpga/Makefile      |  1 +
 .../socfpga/socfpga_cyclone5_draeger_m48.dts  | 91 +++++++++++++++++++
 4 files changed, 95 insertions(+)
 create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts

-- 
2.47.3