Re: [PATCH] arm64: dts: qcom: Add PMIC thermal support for Agatti QRB2210-RB1 platform

[Raj Aryan]

On Thu, Sep 03, 2026 at 11:02:16AM +0200, Konrad Dybcio wrote:
> On 8/24/26 4:49 PM, Raj Aryan wrote:
> > Add ADC channels for msm, quiet and xo thermistors along with
> > their ADC thermal bridge nodes and thermal zones for PMIC
> > thermal mitigation.
> > 
> > Signed-off-by: Raj Aryan <raj.aryan@xxxxxxxxxxxxxxxx>
> > ---
> 
> [...]
> 
> > +	msm_therm_bridge: msm-therm-bridge {
> > +		compatible = "generic-adc-thermal";
> > +		io-channels = <&pm4125_adc ADC5_AMUX_THM3_100K_PU>;
> > +		io-channel-names = "sensor-channel";
> > +		#thermal-sensor-cells = <0>;
> > +	};
> > +
> > +	quiet_therm_bridge: quiet-therm-bridge {
> > +		compatible = "generic-adc-thermal";
> > +		io-channels = <&pm4125_adc ADC5_AMUX_THM2_100K_PU>;
> > +		io-channel-names = "sensor-channel";
> > +		#thermal-sensor-cells = <0>;
> > +	};
> > +
> > +	xo_therm_bridge: xo-therm-bridge {
> > +		compatible = "generic-adc-thermal";
> > +		io-channels = <&pm4125_adc ADC5_XO_THERM_100K_PU>;
> > +		io-channel-names = "sensor-channel";
> > +		#thermal-sensor-cells = <0>;
> > +	};
> 
> I see the SoM also has a PA_THERM0 thermistor at AMUX1
> 
>

In schematic for qrb2210-rb1, it shows NC. 

> > +
> > +	thermal-zones {
> > +		sys-1-thermal {
> 
> Please give these meaningful names
>

ACK.

> Also, the XO one can go to the PMIC DTSI since it's always there
> 

ACK.

> Konrad

Thanks & Regards
Raj Aryan